Basic Operation (Play Back); Selecting An Input Source; Selecting The Surround Mode; Adjusting The Main Volume - Marantz SR4400 User Manual

SURR. BACK :
Adjust the volume level of the surround back
speaker between -10 dB and +10 dB in 1 level
interval with or cursor button.
• If "None" was selected for the Surround back
speakers setting in the Speaker size, then this
setting will not appear.
CENTER :
Adjust the volume level of the center speaker
between -10 dB and +10 dB in 1 level interval
with or cursor button.
• If "None" was selected for the Center speaker
setting in the Speaker size, then this setting will
not appear.
SUB W :
Adjust the volume level of the subwoofer
speaker between -15 dB and +10 dB in 1 level
interval with or cursor button.
• If "None" was selected for the Subwoofer speaker
setting in the Speaker size, then this setting will
not appear.
When you select "TO MAIN MENU" by pressing
the or button, you can return the SETUP MAIN
MENU by pressing the OK button.
Note:
• SURR.L/R, SURR. BACK, CENTER and SUB W
volume level are synchronized with SETUP
MAIN MENU Speaker Level. (Page 18)
MENU STRUCTURE of SURROUND setup
MODE / Speaker
7.SURROUND
SURROUND MODE
setup
C(Center)LEV
SL(Surround Left)LEV
SR(Surround Right)LEV
SB(Surround back)LEV
S(Subwoofer)LEV
TO MAIN MENU EXIT
exit SETUP
MENU
BASIC OPERATION
(PLAY BACK)

SELECTING AN INPUT SOURCE.

Before you can listen to any input media, you must
first select the input source at the SR4400.
E.G. : DVD
R SR4400 R SR4400
POWER
TV VCR1 DSS/VCR2
CLEAR MEMORY TUNING/PRESET F/P MODE
TUNER CD TAPE
A/D HT-EQ S-DIRECT DISPLAY MUTE
6.1 6.1 6.1 6.1
CH-IN CH-IN CH-IN CH-IN TV TV TV DVD DVD DVD VCR1 VCR1 VCR1 DSS/VCR2 DSS/VCR2 DSS/VCR2 CDR/MD CDR/MD CDR/MD TAPE TAPE TAPE CD CD CD TUNER TUNER TUNER AUX AMP
TV
VOL. SLEEP MUTE
OSD MENU
To select DVD, simply press the DVD button on
the front panel or press DVD button on the remote.
After you have selected DVD, simply turn on the
DVD player and play the DVD.
• The input name will appear in the display on the
front-panel.
• As the input is changed, the SR4400 will
automatically switch to the digital input,
surround mode, attenuation, and night mode
status that were entered during the configuration
process for that source.
• When an audio source is selected, the last video
input used remains routed to the VCR1 & DSS/
VCR2 Outputs and Monitor Outputs. This
permits simultaneous viewing and listening to
different sources.
• When a Video source is selected, the video
signal for that input will be routed to the Monitor
Outputs jack and will be viewable on a TV
monitor connected to the SR4400.

SELECTING THE SURROUND MODE

E.G. : AUTO SURROUND
OK
AV SURROUND RECEIVER SR4400 AV SURROUND RECEIVER SR4400
SURROUND SURROUND
SETUP/
MENU OFF
T.TONE
S-DIRECT AUTO
1 2
NIGHT CSII EX/ES
4 5
CLEAR MEMORY
DISPLAY M-CH ST STEREO 6.1CH IN
A/D HT-EQ 7 8
STANDBY
CLEAR MEMO A/D P.SCAN
6.1 6.1 CH-IN CH-IN
POWER ON/STANDBY PHONES TV DVD VCR1
0
CHANNEL/SKIP
BASS TREBLE
TUNE/SEARCH
To select the surround mode during playback, turn
the SURROUND knob on the front panel or press
the surround mode button on the remote .

ADJUSTING THE MAIN VOLUME

VOLUME VOLUME
DOWN DOWN UP UP
ET F/P MODE
DISPLAY MUTE
DVD
CDR/MD TAPE CD TUNER
CDR/MD
MAIN
VOL.
Adjust the volume to a comfortable level using the
VOLUME control knob on the front panel or MAIN
VOL. / buttons on the remote.
To increase the volume, turn the VOLUME knob to
clockwise or press MAIN VOL.
remote, to decrease the volume, turn it to
counterclockwise or press MAIN VOL.
the remote.
Notes:
• The volume can be adjusted within the range of – ∞
to + 18 dB, in steps of 1 dB.
• However, when the channel level is set as
described on page 18, if the volume for any
channel is set at +1 dB or greater, the volume
cannot be adjusted up to +18 dB.
(In this case the maximum volume adjustment
range is "+18 dB - Maximum value of channel
level)
ADJUSTING THE TONE(BASS &
TREBLE) CONTROL.
S-DIRECT AUTO DTS
1 2 3
NIGHT CSII EX/ES DSP
4 5 6
DISPLAY M-CH ST STEREO 6.1CH IN
7 8 9
CLEAR MEMO A/D P.SCAN
0
CHANNEL/SKIP
BASS TREBLE TUNE/SEARCH
MODE DISP./RDS F.DIRECT
DTS
3
+/A /ANT –/B /VCR ATT. PTY
DSP
6
DISC/DECK
9
During a listening session you may wish to adjust
the Bass and Treble Control to suit your listening
tastes or room acoustics.
To adjust the bass effect , press BASS
BASS on the remote.
To adjust the treble effect , press TREBLE
TREBLE on the remote.
Notes :
• The tone control function can work for the front
left and front right speakers.
• When Source Direct mode is set, tone control is
disable.
TV VCR1 DSS/VCR2 DVD
TUNER CD TAPE CDR/MD
AUX AMP
TV
MAIN TEMPORARILY TURNING OFF THE
VOL. SLEEP MUTE VOL.
SOUND
OSD MENU
OK
VOLUME
DOWN UP
ESET F/P MODE
button on the
DISPLAY MUTE MUTE
CDR/MD TAPE CD TUNER
button on
To temporarily silence all speaker outputs such as
when interrupted by a phone call, press the MUTE
button on the front panel or remote.
This will interrupt the output to all speakers and the
head-phone jack, but it will not affect any recording
or dubbing that may be in progress.
When the system is muted, the display will show
"MUTE" .
Press the MUTE button again to return to normal
operation.

USING THE SLEEP TIMER

POWER
TV VCR1
TUNER CD
AUX
TV
VOL. SLEEP
OSD
To program the SR4400 for automatic standby,
press SLEEP buton on the remote.
Each press of the button will increase the time
before shut down in the following sequence.
or
or
TV VCR1 DSS/VCR2 DVD
TUNER CD TAPE CDR/MD
AUX AMP
TV
MAIN
VOL. SLEEP MUTE VOL.
OSD MENU
OK
DSS/VCR2 DVD
TAPE CDR/MD
AMP
MAIN
MUTE VOL.
MENU
21