Basic Operation (Tuner); Listening To The Tuner; Preset Memory - Marantz SR8200 User Manual

BASIC OPERATION (TUNER)

LISTENING TO THE TUNER

Frequency scan step for AM is selectable.
Default setup is 10 kHz step, if your country's standard is 9 kHz step,
touch "AM" button on the remote more than 6 seconds. Scan step will
change.
Note:
• Preset memory for the tuner will clear by changing this setup.
AUTO TUNING
3. 2. 1.
(USING THE SR8200)
1.
To select tuner and desired band (FM, LW or AM), press the
TUNER button on the front panel.
2.
Press F/P button on the front panel to display the frequency.
3.
Press the TUNING UP or DOWN button on the front panel for
more than 1 second to start the Auto tuning function.
4.
Automatic searching begins then stops when a station is tuned in.
(Using the remote control unit)
1.
To select tuner and desired band (FM, LW or AM), tap desired
band FM, LW or AM on the remote.
2.
Touch Tuning^ or Tuning
3.
Automatic searching begins then stops when a station is tuned in.
If tuning does not stop at the desired station, use to the "Manual
tuning" operation.
MANUAL TUNING
3. 2. 1.
(USING THE SR8200)
1.
To select tuner and desired band(FM, LW or AM), press the
TUNER button on the front panel
2.
Press the F/P(Frequency/Preset) button on front panel , to
appears frequency on the display.
3.
Press the TUNING UP or DOWN button.
(Using the remote control unit)
1.
To select tuner and desired band(FM, LW or AM), tap desired
band FM, LW or AM on the remote.
2.
Tap Tuning^ or Tuning
v
station.
1.
2.
more than 1 second on the remote.
v
1.
2.
on the remote to tune in the desired
DIRECT FREQUENCY CALL
2.
1.
1.
To select tuner and desired band(FM, LW or AM), tap desired
band FM, LW or AM on the remote.
2.
Tap the Freq. Direct on the remote, display will show "FREQ -- --".
3.
Input your desired station's frequency with ten keypad on the
remote.
4.
The desired station will automatically be tuned.
(FM) TUNING MODE (AUTO STEREO OR MONO)
DOWN
DOWN TUNING UP
DISPLAY CLEAR MEMO F/P T-MODE P-SCAN
ENTER MUTE
7.1CH-IN DVD DSS TV VCR 1 VCR2/DVD-R CD TAPE CD-R TUNER
MULTI-SPK SLEEP S-DIRECT AUX1
AUX1 INPUT
DIGITAL S-VIDEO VIDEO L AUDIO R
PHONES MULTI ROOM A/D NIGHT AUX2
When in the auto stereo mode, AUTO indicator keeps to light on the
display.
The "ST" indicator lights on when a stereo broadcast is tuned in.
At open frequencies, the noise is muted and the "TUNED" and "ST"
indicators turn off.
If the signal is weak, it may be difficult to tune into the station in stereo.
In such a case, press the T-MODE button n the front panel or tap
Streo/Mono on the remote control unit.
"AUTO" indicators turn off, FM stereo broadcasts are received in
monaural and the "ST" indicator turns off.
To return to auto stereo mode, press the T-MODE button or tap Streo/Mono
on the remote control unit again. AUTO indicator lights on the display.

PRESET MEMORY

With this unit you can preset up to 50 FM/LW/AM stations in any order.
For each station, you can memorize the frequency and reception
mode if desired.
AUTO PRESET MEMORY
This function automatically scans the FM, LW and AM band and
enters all stations with proper signal strength into the memory.
5. 2. 2.4. 3.
1.
To select FM , press the TUNER button on the front panel.
2.
While pressing the MEMO button, press the TUNING UP or
DOWN button to up.
"AUTO PRESET" will appear on the display, and scanning starts
from lowest frequency.
3.
VOLUME
UP
ATT
1. 3.
-2) -1)
43