Delete Saved Remote Control Codes - Marantz SR7005 User Manual

ENGLISH DEUTSCH
Operating learn function

Delete saved remote control codes

Codes can be erased in three ways: by buttons, sources, and by all
memory contents.
n Delete remote control codes for each button
1
SET
Press and hold down and
SOURCE SEL until the LEARN
indicator blinks.
2
Press input source select buttons
to select the input source you
want to delete.
The input source is shown in the remote
control display.
3
HDMI
Press and hold down and
press the learned button to be
erased twice.
"ERASE" is shown in the remote control
display, and the mode returns to learning
mode.
SET
• To return the normal mode, press .
n Delete remote control codes for each input
source
1
Press and hold down SET and
SOURCE SEL until the LEARN
indicator blinks.
2
Press and hold down HDMI and
press the learned input source
select buttons to be erased twice.
"ERASE" is shown in the remote control
display.
3
ENTER
Press to continue erasing.
The indicator blinks twice and the
mode returns to LEARN mode.
• To cancel the erasing operation, do not
ENTER
press , and simply press any other
button.
SET
• To return the normal mode, press .
90
FRANÇAIS ITALIANO ESPAÑOL
n Delete remote control codes for all input
sources
1
Press and hold down
SOURCE SEL
indicator blinks.
2
Press and hold down
press ON and
LEARN indicator lights.
3
ENTER
Press
"ERASE" is shown in the remote
control display, and the mode returns
to learning mode.
• To cancel the erasing operation, do not
ENTER
press and simply press any other
button.
• To return the normal mode, press
NOTE
Erasing codes will return to the factory preset code, or there will leave
empty if the button has no factory preset code.
NEDERLANDS SVENSKA
SET and
until the LEARN
HDMI
and
STANDBY .
to continue erasing.
SET
.