Marantz SR7005 User Manual page 89

Setting items
Firmware Update Check for Update : Check for firmware updates. You can also check
Update the firmware of the approximately how long it will take to complete an update.
receiver. Start : Execute the update process.
When updating starts, the power indicator becomes red and the menu
screen is shut down. The amount of update time which has elapsed is
displayed.
When updating is complete, the power indicator becomes green and
normal status is resumed.
• If updating fails, the set automatically retries, but if updating is still not
possible, one of the messages shown below is displayed. If the display
reads as shown below, check the settings and network environment,
then update again.
Display
Updating fail
Login failed
Server is busy
Connection fail
Download fail
Add New Feature Upgrade : Execute the upgrade process.
Display new features that When updating starts, the power indicator becomes red and the menu
can be downloaded to this screen is shut down. The amount of update time which has elapsed is
unit and perform an update. displayed.
When upgrading is complete, the power indicator becomes green and
normal status is resumed.
• If the upgrade is not successful, an error message identical to those in
"Firmware Update" will appear on the display. Check the settings and
network environment, then update again.
Upgrade Status : Display a list of the additional functions provided by the
upgrade.
See the Marantz website for details about updates.
When the procedure is complete, "Registered" is displayed in this
menu and updates can be carried out. If the procedure has not been
carried out, "Not Registered" is displayed.
The ID number shown on this screen is
needed when carrying out the procedure.
The ID number can also be displayed by
pressing and holding
least 3 seconds.
Remote control operation
buttons
SVENSKA NEDERLANDS
Setting details
Description
Updating failed.
Failure to log into server.
Server is busy. Wait a while then try again.
Failure in connecting to server.
Downloading of the firmware has failed.
RETURN
o and for at
Move the cursor
(Up/Down/Left/Right)
ESPAÑOL ITALIANO
Notes concerning use of "Firmware Update" and "Add New Feature"
• In order to use these functions, you must have the correct system requirements and settings for a
broadband Internet connection (vpage 24).
• Do not turn off the power until updating or upgrating is completed.
• Even with a broadband connection to the Internet, approximately 1 hour is required for the updating/
upgrading procedure to be completed.
• Once updating/upgrade starts, normal operations on this unit cannot be performed until updating/
upgrading is completed.
• Furthermore, updating/upgrading the firmware may reset the backup data for the parameters, etc. set
for this unit.
• The following backup data may be erased after an update or upgrade.
• Internet radio preset channel
• Internet radio Recently Played data
• Username registered for Flickr Contact
• Data in Internet radio, media server and USB memory device
• If the update or upgrade fails, press and hold the
more than 5 seconds, or remove and re-insert the power cord. "Update retry" appears
on the display and update restarts from the point at which update failed. If the error
continues despite this, check the network environment.
• Information regarding the "Firmware Update" function and "Add New Feature" will be announced on
the Marantz web site each time related plans are defined.
• When usable new firmware is released with "Firmware Update" or "Add New Feature", a notification
message is displayed on the menu screen. When you do not want to be notified, set "Update Notification"
(vpage 79) and "Upgrade Notification" (vpage 79) to "OFF".
Confirm the setting
FRANÇAIS DEUTSCH
Manual Setup
ON/STANDBY
on the main unit for
Return to previous menu
ENGLISH
83