Marantz SR7005 User Manual page 77

Setting items
Dynamic EQ ®
ON : Use Dynamic EQ.
Solve the problem of OFF : Do not use Dynamic EQ.
deteriorating sound quality
as volume is decreased
• is displayed when set to "ON".
by taking into account
human perception and
• Buttons on the remote control unit or main unit
room acoustics. Works with
can be used for operations.
MultEQ XT.
DYN EQ/VOL
Press
DYN EQ/VOL
Each time
changed as shown below.
Dynamic EQ : ON
Dynamic Volume : Heavy
Dynamic EQ : OFF
Dynamic Volume : OFF
Reference Level Offset 0dB (Film Ref) : This is the default setting and should be used when
Audyssey Dynamic EQ is listening to movies.
referenced to the standard 5dB : Select this setting for content that has a very wide dynamic range,
film mix level. It makes such as classical music.
adjustments to maintain 10dB : Select this setting for jazz or other music that has a wider dynamic
the reference response range. This setting should also be selected for TV content as that is usually
and surround envelopment mixed at 10 dB below film reference.
when the volume is turned 15dB : Select this setting for pop/rock music or other program material
down from 0 dB. However, that is mixed at very high listening levels and has a compressed dynamic
film reference level is not range.
always used in music or
Setting is enabled when "Dynamic EQ" is "ON" (vpage 71).
other non-film content.
Dynamic EQ Reference
Level Offset provides three
offsets from the film level
reference (5 dB, 10 dB, and
15 dB) that can be selected
when the mix level of the
content is not within the
standard.
Remote control operation
buttons
SVENSKA NEDERLANDS
Setting details
.
is pressed, the setting is
Dynamic EQ : ON
Dynamic Volume : Medium
Dynamic EQ : ON Dynamic EQ : ON
Dynamic Volume : OFF Dynamic Volume : Light
Move the cursor
(Up/Down/Left/Right)
ESPAÑOL ITALIANO
Setting items
Dynamic Volume ®
Heavy : Most adjustment to softest and loudest sounds.
Solve the problem of large Medium : Medium adjustment to loudest and softest sound.
variations in volume level Light : Least adjustment to loudest and softest sounds.
between TV, movies and OFF : Do not use "Dynamic Volume".
other content (between
quiet passages and
• is displayed when set to "ON".
loud passages, etc.) by
automatically adjusting to
• If "Dynamic Volume" is set to "Yes" in Auto
the user's preferred volume
Setup (vpage 10), the setting is automatically
setting.
changed to "Evening".
• Buttons on the remote control unit or main unit
can be used for operations.
DYN EQ/VOL
Press
DYN EQ/VOL
Each time
changed as shown below.
Dynamic EQ : ON
Dynamic Volume : Heavy
Dynamic EQ : OFF
Dynamic Volume : OFF
n A-DSX Soundstage
Adjust Audyssey DSX™ setting and sound stage parameters.
Setting items
Audyssey DSX ON-Height- : Turn on A-DSX processing for height
Provides more immersive expansion.
surround sound by adding ON-Wide- : Turn on A-DSX processing for wide
the new channels. expansion.
OFF : Do not set Audyssey DSX.
• This can also be set by pressing
• The
Confirm the setting
FRANÇAIS DEUTSCH
Audio/Video Adjust
Setting details
.
is pressed, the setting is
Dynamic EQ : ON
Dynamic Volume : Medium
Dynamic EQ : ON Dynamic EQ : ON
Dynamic Volume : OFF Dynamic Volume : Light
Default settings are underlined.
Setting details
A-DSX
.
indicator illuminates on the display.
Audyssey DSX : ON -Height-
OFF Audyssey DSX : ON -Wide-
Return to previous menu
ENGLISH
71