Rear Panel; Remote Control Operation - Marantz ZC4001 User Manual

REAR PANEL

SERVICE
ONLY
q w
q
EXT INPUT
This is the analog audio input. The audio inputs
require RCA-type connectors.
w
SERVICE ONLY
This is a servicing port. Do not connect anything to
it.
4
e
e
AC Power cable
Connect the power outlet on the wall.

REMOTE CONTROL OPERATION

The ZC4001 does not come with a remote controller.
However, it does have an infrared sensor that functions as a remote control signal receptor, and therefore
it can be operated with the system remote controller (RC5500SR, etc.) of other Marantz products.
Remote-controllable range
60°
The distance between the transmitter of the remote control unit and the infrared sensor of the ZC4001
should be less than about 16.4 ft (5meters).
If the transmitter is pointed away from the infrared sensor or if there is an obstacle between them, remote
control may not be possible.