Hdmi Setup; Audio Setup - Marantz SR7005 User Manual

HDMI Setup

Make settings for HDMI video/audio output.
Setting items
RGB Range Normal : Output with RGB video range (16 (black) to 235 (white)).
Set the video range of RGB Enhanced : Output with RGB video range (0 (black) to 255 (white)).
output from the HDMI
This setting is active when using a TV equipped with a DVI terminal.
connector.
Auto Lip Sync ON : Compensated.
Make automatic OFF : Not compensated.
compensation for timing
shift in audio and video
output.
HDMI Audio Out AMP : Play back through speakers connected to the receiver.
Select HDMI audio output TV : Play back through TV connected to the receiver.
device.
When the HDMI control function is activated, priority is given to the TV
audio setting (vpage 52 "HDMI control function").
Monitor Out Monitor 1 : A TV connected to the HDMI OUT 1 terminal is always used.
Make settings for HDMI Monitor 2 : A TV connected to the HDMI OUT 2 terminal is always used.
monitor output.
With "Resolution" (vpage 67) not set to "Auto", check whether
the TV you are using is compatible with the resolution under "HDMI
Information" – "HDMI Monitor 1 Information" and "HDMI Monitor 2
Information" (vpage 84).
HDMI Control ON : Use HDMI control function.
You can link operations with OFF : Do not use HDMI control function.
devices connected to HDMI
and compatible with HDMI
• When a device that is not compatible with the HDMI control function is
Control.
connected, set "HDMI Control" to "OFF".
• Please consult the operating instructions for each connected component
to check the settings.
• Refer to "HDMI control function" (vpage 52) for more information about
the HDMI control function.
NOTE
• When "HDMI Control" is set to "ON", it consumes more standby
power. If you are not using this unit for an extended period, it is
recommended that you unplug the power cord from the power outlet.
• "HDMI Control" does not work when the power to the equipment is off.
Either turn power on or set to standby.
• The HDMI control function controls operations of a TV that is compatible
with the HDMI control function. Make sure that the TV and HDMI are
connected when you perform HDMI control.
• If the "HDMI Control" settings have been changed, always reset the
power to connected devices after the change.
Remote control operation
buttons
SVENSKA NEDERLANDS
Default settings are underlined.
Setting details
Move the cursor
(Up/Down/Left/Right)
ESPAÑOL ITALIANO
Setting items
Standby Source Last : This item is set at the last-used input source.
Sets the HDMI input source HDMI1 / HDMI2 / HDMI3 / HDMI4 / HDMI5 / HDMI6 : Put the respective
to put into standby when input source into standby.
the power is on.
"Standby Source" can be set when "HDMI Control" is set to "ON".
Power Off Control All : If power to a connected TV is turned off independently of the input
Links the power standby source, power to this unit is automatically set to standby.
of this unit to external Video : If power to a connected TV is turned off when the input source
equipment. is BD / DVD / VCR / SAT / GAME / AUX1 / TV, power to this unit is
automatically set to standby.
OFF : This unit does not link with power to a TV.
"Power Off Control" can be set when "HDMI Control" is set to "ON".

Audio Setup

Make settings for audio playback.
Setting items
7.1ch IN SW Level Subwoofer Level : Set playback level of subwoofer signal input from the
Setup playback method for 7.1CH INPUT connector.
analog signals inputted from • +10dB : This is the recommended level.
7.1CH INPUT connectors. • +15dB / +5dB / 0dB : Select the level according to the player being used.
EQ Customize Audyssey Byp. L/R : Set when not using "Audyssey Byp. L/R" equalizer.
Set so that unused equalizer • Used : Use.
settings are not displayed • Not Used : Do not use.
MULTEQ
when is pressed.
Set so that "Audyssey Byp. L/R" settings can be made when
Audyssey ® Auto Setup is performed.
Audyssey Flat : Set when not using "Audyssey Flat" equalizer.
• Used : Use.
• Not Used : Do not use.
Set so that "Audyssey Flat" settings can be made when Audyssey
Auto Setup is performed.
Manual : Set when not using the "Manual" equalizer.
• Used : Use.
• Not Used : Do not use.
Confirm the setting
FRANÇAIS DEUTSCH
Manual Setup
Setting details
Default settings are underlined.
Setting details
Return to previous menu
ENGLISH
77