Connections; Important Information; Video Conversion Function - Marantz SR7005 User Manual

ENGLISH DEUTSCH

Connections

Important information

• Make connections as follows before using this unit. Select an appropriate connection type
according to the components to be connected.
• You may need to make some settings on this unit depending on the connection method. Refer to
each description for more information.
• Select the cables (sold separately) according to the components being connected.
NOTE
• Do not plug in the power cord until all connections have been completed.
• When making connections, also refer to the operating instructions of the other components being
connected.
• Be sure to connect the left and right channels properly (left with left, right with right).
• Do not bundle power cords together with connection cables. Doing so can result in noise.
Converting input video signals for output

(Video conversion function)

This unit is equipped with three types of video input connectors (HDMI, Component video and video) and
three types of video output connectors (HDMI, Component video and video).
Use the connectors corresponding to the components to be connected.
This function automatically converts various formats of video signals input to this unit into the formats used
to output the video signals from this unit to a monitor.
GFlow of video signals for MAIN ZONEH
Video device
Input
(IN)
Output
HDMI connector HDMI connector
Component video Component video
connectors connectors
Video connector Video connector
14
FRANÇAIS ITALIANO ESPAÑOL
This unit
Monitor
Output
(MONITOR OUT)
HDMI connector HDMI connector
Component video Component video
connectors connectors
Video connector Video connector
NEDERLANDS SVENSKA
Video device
Output
Component video
connectors
Video connector
in Set as Necessary
• Set when not using the video conversion function.
"Video Convert" (vpage 66)
• Set when changing the resolution of the video signal.
"Resolution" (vpage 67)
• The video conversion function supports the NTSC, PAL, SECAM, NTSC 4.43, PAL-N, PAL-M and PAL-60
formats.
• The resolution of the video signal input to this unit's HDMI connector is the one set at "Resolution"
(vpage 67). (1080p HDMI signals and 1080p component signals are output at 1080p, regardless of the
setting.)
• Resolutions of HDMI-compatible TVs can be checked at "HDMI Monitor 1 Information" or "HDMI
Input
Monitor 2 Information" (vpage 84).
NOTE
• HDMI signals cannot be converted into analog signals.
• When a non-standard video signal from a game machine or some other source is input, the video
conversion function might not operate.
• Component video input signals cannot be converted into Video format.
• A menu is output via the HDMI connector or component video connector.
• When using component output terminal 2 for ZONE2 video signal output, set "Input Setup" – "Input
Assign" – "Component" (vpage 66) in the menu to "ZONE2".
GFlow of video signals for ZONE2H
This unit
Input Output
(IN)
(MONITOR OUT)
Component video Component video
connectors connectors (OUT2/ZONE2)
Video connector Video connector
Monitor
Input
Component video
connectors
Video connector