Assembly
Remove Cutting Attachment
1.
Turn the unit over so that the gearcase output shaft faces UP.
2.
Align the hole in the holder (A) with the notch in the gearcase flange, and
then temporarily lock the output shaft by inserting a hex wrench through
both holes.
3.
While holding the hex wrench turn the trimmer head clockwise to remove.
4.
Remove the hex wrench.
Removing the Existing Cutting Attachment Shield
1.
Remove the four socket-head cap screws (A),
bracket (B) and two shims (C).
2.
Remove the cutting attachment shield from the
gearcase.
Remove Handle Assembly
1.
Remove handle assembly. Retain all parts for
future use.
4
A
C
A
26107
B
C