Using A Brushcutter Blade - Shindaiwa 89379 Conversion Instructions

Using A Brushcutter Blade

WARNING!
■
Before working with a blade-equipped unit, always inspect and clear the area of objects that could interfere with or
damage the blade.
■
Never use a blade near sidewalks, fence posts, buildings or other objects that could cause injury or damage.
■
Never use a blade for purposes other than those for which it was designed.
■
Whenever you strike a hard object with a blade, always stop the brushcutter and carefully inspect the blade for dam-
age. NEVER OPERATE THE UNIT WITH A DAMAGED BLADE!
■
A blade-equipped unit
■
Always make sure the cutting attachment shield is properly installed before operating the unit.
Blade Thrust
'Blade thrust' is a sudden sideways or backward motion of the brushcutter.
Such motion may occur when the blade jams or catches on an object such
as a sapling tree or tree stump. BE CONSTANTLY ALERT FOR BLADE
THRUST AND GUARD AGAINST ITS EFFECTS!
Handle Bar
A brushcutter's handle bar helps prevent the operator from moving forward,
or the unit moving rearward, thus preventing inadvertent bodily contact with
the blade. ALWAYS KEEP THE HANDLE BAR SECURELY IN PLACE ON
THE UNIT!
Shoulder Strap or Harness
A shoulder strap or harness provides additional protection against blade
thrust. In addition, a shoulder strap or harness gives significant support and
comfort to help ensure safe and efficient operation.
When operating a unit equipped with a blade, make sure both the handle/
barrier bar and shoulder strap or harness are adjusted to the size of the
operator using the unit.
The blade rotates counter-clockwise. For best performance and to minimize
being struck by debris, move the blade from right to left while advancing on
your work. Position the blade so cuts are made between the blade's 7 o'clock
and 11 o'clock positions (as viewed from above). DO NOT cut between the
11 o'clock and 5 o'clock positions (shaded area).
must be equipped with a bicycle-type handlebar or barrier as well as a harness or strap.
Eleven
O'Clock
Blade
Rotation
OK To Cut
Seven
O'Clock
Five
O'Clock
BCC17
11