Table of Contents
Advertisement
Shoulder Strap
Adjust the shoulder strap so the shoulder pad rests comfortably on the off-side
shoulder and the cutting path of the cutting attachment is parallel to the
ground.
WARNING!
Always wear a shoulder strap when operating this unit with a blade. A
shoulder strap is also recommended when using trimmer line.
Using a shoulder strap with a brush-cutter allows you to maintain proper
control of the unit and reduces fatigue during extended operation.
Although a shoulder strap accessory is not required for use with a grass
trimmer, a shoulder strap can increase operator comfort during extended
periods of operation.
balance and adjust unit
1.
Loosen harness clamp screw.
2.
Put on harness and attach unit to harness.
3.
Slide harness clamp up (A) or down until unit balances with head approxi-
mately 50-75 mm (2 -3 in.) from the ground.
4.
Tighten harness clamp screw.
5.
Loosen Handle bar clamp screws (B), and position Handle bar for comfort-
able operation. (See page 7.)
6.
Tighten Handle bar clamp screws securely.
10
NOTE:
NOTE:
A
B
Advertisement
Table of Contents
