Specifications; Q-750D Ultra Specifications - Runco Q-750d Ultra Series Installation & Operation Manual

Table 7-1 lists the Q-750d Ultra specifications.
Table 7-1. Q-750d Ultra Specifications
Projector Type:
Illumination:
Native Resolution:
Aspect Ratios:
Video Standards:
Video Compatibility:
Picture Size (16:9 Screen):
Processing:
Control Options:
Calibration:
Color Gamut:
Throw Distance
(Factor x Screen Width):
Vertical Offset:
Horizontal Offset:
Inputs
(from DHD Controller):
Q-750d Ultra Series Installation/Operation Manual
Digital Light Processing™ (DLP™),Single-Chip, 16:9
SuperOnyx™ DMD™ with InfiniLight
TM
RGB InfiniLight LEDs for 135% NTSC color gamut with
TM
Runco Smart Color and Personal Color Equalizer
Full HD, 1920 x 1080 (16:9)
Refer to Table 7-2
Refer to Table 7-2
480i, 480p, 576i, 576p, 720p, 1080i 50/60, 1080p 24/50/60
Recommended Width: 72 in. (1.83 m) to 92 in. (2.34 m)
Maximum Width: 108 in. (2.74 m)
Runco DHD4 Processor with ViVix IV™ technology and BRiC
(Backup, Recovery and Clone) tool
• Serial commands via RS-232
• Discrete infrared (IR) remote
• Consumer Electronics Control (CEC) protocol support via
HDMI
• Ethernet
ISF Certified Calibration Configuration
Fully adjustable, > BT.709 (REC709)
Refer to Table 3-3
35% of screen height above or below lens center (70% of one
half of the screen height)
7.5% of screen width left or right of lens center (15% of one
half of the screen width)
(1) HDMI with HDCP
(1) RS-232

7. Specifications

TM
Illumination
TM
109
7.1
Q-750d Ultra
Specifications