External Ir Receiver Connection - Runco Signature Cinema SC-30d Installation & Operation Manual

Connecting an External IR Receiver to the Dimension Digital Controller: If infrared
signals from the remote control cannot reach the Dimension Digital Controller due to
excessive distance or obstructions such as walls or cabinet doors, you can connect an
external IR receiver to extend the range of the remote control. See Figure 3-17.
IR Sensor
(3.5-mm, mini
phono plug)
Pri. Display Control Pri. Display Control Sec. Display Control Sec. Display Control
IR
HDMI Ou HDMI Ou
DMI 5 DMI 5 HDMI 7 HDMI 7
To Sec. Display To Sec. Display
HDMI Out HDMI Out
DMI 6 DMI 6 HDMI 8 HDMI 8
Ethernet Ethernet
Audio Only Audio Only
Figure 3-17. External IR Receiver Connection
Runco SC-30d/SC-35d Installation/Operation Manual
Remote Control
IR Repeater
RS-232 RS-232
HDMI Out HDMI Out
To Pri. Display To Pri. Display
41
Installation