Dimension Digital Controller Specifications - Runco Signature Cinema SC-30d Installation & Operation Manual

Specifications
7.2
Dimension Digital
Controller
Specifications
Table 7-2 lists the Dimension Digital Controller specifications.
Table 7-2. Dimension Digital Controller Specifications
Aspect Ratios:
Video Standards:
Inputs:
Outputs:
Control Options:
Ethernet Communication:
RS-232 Communication
Parameters:
Trigger Outputs:
Accessory Applications:
Power Requirements:
Operating Environment:
4:3, Letterbox, 16:9, VirtualWide, Cinema, Virtual Cinema,
Native, Auto Cinema
• DisplayPort with HDCP
• HDMI and DVI with HDCP for digital video
• Component and RGB HDTV (1080p, 1080i, 720p)
• Component and RGB EDTV (576p, 480p)
• Component and Composite SDTV (576i, 480i)
• RGB SCART with adaptor
• NTSC (M, 4.43)
• PAL (B, G, H, I, N, M)
• SECAM (M)
• CEA-861D
• HDMI 3D
(1) DisplayPort 1.1a
(8) HDMI with 3D Support, CEC and Deep Color
(1) Component/SCART (3 x RCA)
(2) Component/RGBHV (15-pin VGA)
(3) Composite
(2) HDMI with 3D Support and Deep Color to SC-30d/SC-35d
(1) HDMI with Deep Color to second display or audio
processor
• Front panel vacuum fluorescent display and keypad
• Discrete infrared (IR) remote
• RS-232 (female DB9) for serial commands
• USB (type B female) for firmware upgrade
• RS-232 (male DB9) for accessories
• 3.5-mm wired IR input for Niles/Xantech-compatible IR
systems
• Consumer Electronics Control (CEC) protocol support via
HDMI
• Ethernet
RJ45 (female) for web server, e-mail, auto firmware upgrade
and Telnet
19200 bps, no parity, 8 data bits, 1 stop bit, no flow control
(3) +12 VDC, each rated at 250 mA and thermal
fuse-protected
Runco Firmware Upgrader, Runco BRiC (backup, restore,
clone), CalMAN by SpectraCal for automatic calibration
100-240V~, 47-63Hz, 0.85 Amps
41°F to 104°F (5°C to 40°C), 0% to 90% humidity
(non-condensing); up to 10,000 feet (3,048 meters) altitude
132 Runco SC-30d/SC-35d Installation/Operation Manual