Service - Runco Signature Cinema SC-30d Installation & Operation Manual

• Splash Enable: When you have finished customizing the splash screen, select Splash
Enable from the Splash Configure menu. Then, select On and press ENTER.
OSD Position: To adjust the position of the OSD, select OSD Position from the
Calibration menu and press ENTER.
Press or to select "Hor." or "Ver." Then, press
Use the Service menu to access advanced projector configuration settings. This menu
should be used by ISF-certified technicians only.
You must enter a passcode to access the Service menu.
Note
Test Video: Select Test Video from the Service Menu to access the internal test patterns
on the Dimension Digital Controller. Table 4-4 lists the available test patterns and
describes their suggested usage.
Table 4-4. Test Patterns and Their Suggested Usage
Pattern
Color Bars 1
Color Bars 2
Focus
Runco SC-30d/SC-35d Installation/Operation Manual
or to change the position.
Suggested Usage
Use this pattern when making
color saturation and tint
adjustments.
Use this pattern when making
color saturation and tint
adjustments.
Use this pattern when adjusting
the focus.
85
Operation

Service

Service
Test Video
Input Names
Remote Control
Display Device
Network
Color Space
Triggers
Miscellaneous
HDMI
Front Panel Brightness
Auto Power Off
Standby Mode
System Reset