Proper installation of your projector will ensure the quality of your display. Whether you are
installing a projector temporarily or permanently, you should take the following into
account to ensure your projector performs optimally.
It is a common practice in custom audio/video installations to conceal cables by running
them through walls.
If you plan to do this with your SC-30d/SC-35d installation, you will need to run three
cables from the projector to the Dimension Digital Controller: two (2) HDMI cables and a
serial control cable (typically Category 5 or 4-wire telephone cable).
Choose the installation type that best suits your needs: front or rear screen, floor mount or
inverted mount. Table 3-2 compares these various installation methods.
Table 3-2. Projector Installation Options
Advantages
• Easy to set up
• Can be moved or changed quickly
• Easy to access
Front Screen, Inverted Mount (ceiling) Installation
• Does not take up audience space
• Projector is unobtrusive
• Projector cannot be accidentally moved
• Projector is completely hidden
• Projector is easily accessed
• Usually good ambient light rejection
Rear Screen, Inverted Mount (ceiling) Installation
• Projector is completely hidden
• Usually good ambient light rejection
• Projector is completely hidden
• Usually good ambient light rejection
• Requires less space behind screen than
other rear screen installations
In general, minimize or eliminate light sources directed at the screen. Contrast ratio in your
images will be noticeably reduced if light directly strikes the screen, such as when a shaft
of light from a window or floodlight falls on the image. Images may then appear washed
out and less vibrant.
Runco SC-30d/SC-35d Installation/Operation Manual
Front Screen, Floor Mount Installation
• Shares floor space with audience
• Installation is more permanent
• Projector access is more difficult
Rear Screen, Floor Mount Installation
• Requires separate room
• Installation cost is usually higher
• Requires separate room
• Installation cost is usually higher
Rear Screen, Floor Mount with Mirror
• Requires separate room
• Installation cost is usually higher
Considerations
21
Installation
3.3
Installation
Considerations
Pre-Wiring for 3D: Run
Dual HDMI Cables
Installation Type
Ambient Light