System Exclusive Messages - Boss BR-1200CD Owner's Manual

Digital recording studio
Hide thumbs Also See for BR-1200CD:
Table of Contents

Advertisement

MIDI Implementation
■System Realtime Messages
●Timing Clock
Status
F8H
* Transmitted when "Sync Gen." is "MIDI CLOCK" in the SYNC parameter.
●Start
Status
FAH
* Transmitted when "Sync Gen." is "MIDI CLOCK" in the SYNC parameter.
●Continue
Status
FBH
* Transmitted when "Sync Gen." is "MIDI CLOCK" in the SYNC parameter.
●Stop
Status
FCH
* Transmitted when "Sync Gen." is "MIDI CLOCK" in the SYNC parameter.
●Active Sensing
Status
FEH
* This is transmitted at intervals of approximately 200 msec.

■System Exclusive Messages

●Universal System Exclusive Message
❍Identity Reply Message
* Receiving Identity Request Message, the BR-1200CD send this message.
Status
Data byte
F0H
7EH, dev, 06H, 02H, 41H, 71H, 01H
00H, 00H, 00H, 00H, 00H, 00H
Byte
Remarks
F0H
Exclusive status
7EH
ID number (Universal Non-realtime Message)
dev
Device ID (dev: 10H - 1FH)
06H
Sub ID#1 (General Information)
02H
Sub ID#2 (Identity Reply)
41H
ID number (Roland)
0AH 02H
Device family code
00H 00H
Device family number code
00H 00H 00H 00H
Software revision level
F7H
EOX (End of Exclusive)
For instructions on setting the device ID, refer to "How to set the device ID:" (p. 344).
❍MIDI Machine Control Command
Status
Data byte
F0H
7FH, Dev, 06H, aaH, ..., bbH
Byte
Remarks
F0H
Exclusive Status
7FH
Universal System Exclusive Realtime Header
Dev
Device ID (7FH)
06H
MMC command message
aaH
command
:
:
bbH
command
F7H
EOX (End of Exclusive)
346
❍STOP (MCS)
Status
F0H
Byte
F0H
7FH
Dev
06H
01H
F7H
* If the transport switch [STOP] was pressed, the BR-1200CD transmits this message.
❍DEFERRED PLAY (MCS)
Status
F0H
Byte
F0H
7FH
Dev
06H
03H
F7H
* If the transport switch [PLAY] was pressed, the BR-1200CD transmits this message.
❍RECORD STROBE
Status
F0H
Byte
F0H
7FH
Dev
06H
06H
F7H
* Transmitted when recording to the audio tracks begins.
❍RECORD EXIT
Status
F0H
Byte
Status
F0H
F7H
7FH
Dev
06H
07H
F7H
* Transmitted when recording to the audio tracks ends.
❍MMC RESET
Status
F0H
Byte
F0H
7FH
Dev
06H
0DH
Status
F7H
F7H
* When powered on the BR-1200CD transmits this message.
Data byte
7FH, Dev, 06H, 01H
Remarks
Exclusive status
Universal System Exclusive Realtime Header
Device ID (7FH)
MMC command message
STOP (MCS)
EOX (End of Exclusive)
Data byte
7FH, Dev, 06H, 03H
Remarks
Exclusive status
Universal System Exclusive Realtime Header
Device ID (7FH)
MMC command message
DEFERRED PLAY (MCS)
EOX (End of Exclusive)
Data byte
7FH, Dev, 06H, 06H
Remarks
Exclusive status
Universal System Exclusive Realtime Header
Device ID (7FH)
MMC command message
RECORD STROBE
EOX (End of Exclusive)
Data byte
7FH, Dev, 06H, 07H
Remarks
Exclusive status
Universal System Exclusive Realtime Header
Device ID (7FH)
MMC command message
RECORD EXIT
EOX (End of Exclusive)
Data byte
7FH, Dev, 06H, 0DH
Remarks
Exclusive status
Universal System Exclusive Realtime Header
Device ID (7FH)
MMC command message
MMC RESET
EOX (End of Exclusive)
Status
F7H
Status
F7H
Status
F7H
Status
F7H
Status
F7H

Advertisement

Table of Contents
loading

Table of Contents