Turning Tracks Off Temporarily (Track Mute) - Boss BR-1200CD Owner's Manual

Basic operation of the recorder

Turning tracks off temporarily (Track Mute)

When recording a band or the like, it is often necessary to turn off just the vocalist's track to listen to the combined
sound of the instruments. In a situation like this, the BR-1200CD allows you to temporarily turn off the audio from
specific tracks (Track Mute).
fig.07-09h
1
Hold down [TRACK MUTE] and press the
track button for the track(s) you want to mute.
The track button(s) will start to flash to indicate that
the corresponding track(s) are now muted.
2
Press [PLAY] to start playback.
No audio will be output from the muted track(s).
Even if its fader is raised, the audio from a track will
not be heard when it is muted.
• When a track is muted, its condition will be the same as if its fader had been moved all the way down. Muting does
not cause recorded audio data to be deleted.
• Track Mute is not enabled for tracks other than those whose Track Type is set to AUDIO (p. 54). The Track Mute is also
cancelled with the track type is changed.
46
2 1,3
3
To cancel a muted condition, again hold down
[TRACK MUTE] and press the track button for
the track(s) for which muting is to be canceled.
The track button(s) will stop flashing to indicate that
the corresponding track(s) are no longer muted.
4
If you wish to store the muted condition, save
the current song (p. 70).