Deleting Audio Data And Closing The Resulting Gap (Track Cut) - Boss BR-1200CD Owner's Manual

Deleting audio data and closing
the resulting gap (Track Cut)
The Track Cut function allows you to delete audio data from
a specified range, and when audio data is deleted in this
way, the section of audio data positioned behind it is moved
forwards to fill the resulting gap.
fig.15-46
A
START END
1. Press [UTILITY].
The Utility Menu screen will appear.
fig.12-12d
2. Move the cursor to the TRACK icon and press [ENTER/
YES].
Alternatively, you can press [F3] (TRACK) if the TRACK
icon is currently displayed.
The Track Menu screen will appear.
fig.15-05d
3. Move the cursor to the CUT icon and press [ENTER/
YES].
Alternatively, you can press [F2] (CUT) if the CUT icon
is currently displayed.
fig.15-49d
The Track Cut screen will appear, allowing you to select
the track and V-Track from which audio data is to be
deleted.
4. Use [CURSOR] and the TIME/VALUE dial to choose
the track and V-Track containing the unwanted audio
data.
If a name has been assigned to the selected track, it will
be displayed at this time.
Editing a recorded performance (Track Edit)
fig.15-50d
5. If you want to delete audio data from other tracks using
fig.15-51d
Time
6. Press [F3] (LOC).
fig.15-52d
the same settings (for range, etc.), move the cursor to
the position shown below and turn the TIME/VALUE
dial.
You will now be able to specify other tracks for deletion
of audio data over the same range. If you want to cancel
the deletion for a specific track, turn the TIME/VALUE
dial counterclockwise until a question mark (?) is
displayed.
• Deletion will not be performed for any line containing
one or more question marks.
• If you want to delete audio data from all V-Tracks or all
tracks, turn the TIME/VALUE dial clockwise until "*" is
selected.
• Alternatively, if you want to select all V-Tracks from all
tracks, select "*- *."
• As Tracks 9/10 and 11/12 are stereo tracks, it will not be
possible to select either of their mono tracks independent
of the other.
The screen for setting the segment to cut appears.
Pressing [F1] (DISP) at this time will allow you to select
how the positions will be specified (i.e., by measure,
time, or marker).
The following parameters should now be set.
START (Start point):
This parameter is used to specify the start point of the
audio data to be deleted.
END (End point):
This parameter is used to specify the end point of the
audio data to be deleted.
107