System Settings - Boss SDE-3000EVH Reference Manual

System Settings

Configuring the Range of Memories Selectable
with the Foot Pedal
1.
Press the [SETUP] button.
The parameter to set is shown in the display.
2.
Use the [TIME] buttons to select "
the [SETUP] (ENTER) button.
¸ ¸ ¸ ¸ ¸ ¸ ¸ ¸ ¸ ¸ ¸ ¸ $ S Y S T E N
3.
Use the [TIME] buttons to select a parameter, and then
use the [DEPTH] buttons to change the value.
Parameter Value
[TIME] buttons [DEPTH] buttons
NEŷNin
(Memory Min)
–
EUH1 EUH1
NEŷNAö
(Memory Max)
Example
Bank EVH
...
Memory 1 8 1
NEŷNin
(Memory Min)
Range of memories that can be selected using the pedal (EVH1–C.01)
40
(Memory Extent)
", and press
SYSTEN SYSTEN
Explanation
This sets the range of memories
that you can select with the foot
Ź84 Ź84
pedal.
A B
... ...
4 1 4 1
NEŷNAö
(Memory Max)
Inheriting EXP Pedal Setting when Switching
Memory
(EXP Hold)
1.
Press the [SETUP] button.
The parameter to set is shown in the display.
2.
Use the [TIME] button to select "SYSTEN", and then
press the [SETUP] button.
¸ ¸ ¸ ¸ ¸ ¸ ¸ ¸ ¸ ¸ ¸ ¸ $ S Y S T E N
3.
Use the [TIME] buttons to select a parameter, and then
use the [DEPTH] buttons to change the value.
Parameter
[TIME] button
C
EXP1. P L. H d
...
84
(EXP 1 Pedal Hold)
EXP2. P L. H d
(EXP 2 Pedal Hold)
Value
Explanation
[DEPTH] button
The operational status of the
and
E±. F nC E²FnC
oFF oFF
carried over when memories are
switched.
The operational status of the EXP
1 and EXP 2 is carried over when
memories are switched, if the
and
E±. F nC E²FnC
the same as the previous memory.
For example, if EXP PEDAL
FUNCTION is set to FOOT VOLUME
in both memories (the one before
and the one after the change),
the volume corresponding to
the position (angle) the pedal
on on
is in at the time of the memory
change will be maintained after
the memory change. On the
other hand, if the memory being
changed to is set to WAH, the
volume is in accordance with the
value set within the memory,
and you'll obtain a wah effect
that is in accordance with a value
that reflects the current position
(angle) of the pedal.
is not
setting is