Copying Mastering Tool Kit Settings; Using Auto Fade In/Out; Automatic Fade-In (Auto Fade In) - Boss BR-1200CD Owner's Manual

Copying Mastering Tool Kit settings

The BR-1200CD's function for copying patches proves
extremely useful when you want to create a number of effect
patches with slightly different settings.
1. Press [F3] (WRITE•COPY) on the Mastering Tool Kit
edit screen.
The Mastering Tool Kit Patch Write/Copy screen will
appear.
fig.36-07d
2. Move the cursor to the copy-source patch number and
select the patch to be copied using the TIME/VALUE
dial.
fig.36-07ad
Although "*TMP(CURRENT)" may be displayed in this
field when you call up the Patch Write/Copy screen after
modifying patch settings, this may be freely changed.
3. Move the cursor to the destination patch number and
select a destination patch using the TIME/VALUE dial.
fig.36-07bd
4. Press [F3] (GO).
The patch will be copied.
When the message "Complete!" appears, it indicates that
copying has been completed.
5. Press [EXIT/NO] several times to return to the top screen.
It is important to remember that the destination
patch will be fully overwritten by the patch specified
by copy-source patch. As it will not be possible to
restore these, care should be taken to insure that
important patches are not accidentally overwritten
in this way.

Using Auto Fade In/Out

The term Fade-In is used to describe the way in which the
volume is gradually raised from silence to the standard level
at the beginning of a song. The opposite effect, where the
volume is gradually reduced to silence at the end of a song, is
referred to as a Fade-Out. Although you can use the Master
fader to fade in or fade out manually, an Auto Fade In/Out
function is available in Mastering mode so that these effects
can be reproduced automatically.
The Auto Fade In/Out function can only be used in
Mastering mode. In addition, this can be used only when
the Mastering Tool Kit is ON (FX: ON is displayed).
Settings made for the Auto Fade In/Out function are
shared by all of the Mastering Tool Kit's patches and are
stored together with the corresponding song.
Performing automatic fade-in
(Auto Fade In)
1. Press [MASTERING TOOL KIT].
The Mastering Tool Kit patch screen will appear.
fig.36-08d
2. Move the cursor to "AUTO FADE IN" and select "ON"
with the TIME/VALUE dial.
3. Press [F1] (AT.FADE).
The Auto Fade In setting screen will appear.
fig.36-09d
4. Move the cursor to the setting you want to change and
select a new value using the TIME/VALUE dial.
START:
This parameter sets the start time for fade in.
Mastering
151