Boss BR-1200CD Owner's Manual page 298

Insert effect parameter functions
This models the lead channel of a Peavey EVH
5150DRV
5150.
MTL STK This is a drive sound suited to metal.
MTLLEAD This is a lead sound suited to metal.
Gain
Adjusts the distortion of the amp.
Bass
Adjusts the tone for the low frequency range.
Middle
Adjusts the tone for the middle frequency range.
Treble
Adjusts the tone for the high frequency range.
Presence
Adjusts the tone for the ultra high frequency range.
* If you have selected "VO DRV," "VO LEAD," "VOCLEAN," "MCH
DRV," "MCHLEAD," or "FAT MCH" as the type, raising the
presence will cut the high range (the value will change from 0 to -100).
Level
Adjusts the overall volume of the entire preamp.
* Be careful not to raise the Level setting too high.
Bright
Turns the bright setting on or off.
OFF:
No brightness is added.
ON:
Brightness is added to create a lighter, crisper tone.
* This will not be displayed for certain Type settings.
Gain SW
Adjusts the distortion generated by the amp, with the level
increasing in sequence for LOW, MIDDLE, and HIGH.
* The sound of each type is created with the assumption that gain is set to
MIDDLE. It is normal, therefore, to use this setting.
Speaker SW
Turns the speaker simulator on or off.
298
0 –100
0 –100
0–100
0–100
0–100
0 –100
OFF, ON
LOW, MIDDLE, HIGH
OFF, ON
Speaker Type
This is a compact open-back speaker
1x10"
cabinet with one 10-inch speaker.
This is a compact open-back speaker
1x12"
cabinet with one 12-inch speaker.
This is a general open-back speaker cab-
2x12"
inet with two 12-inch speakers.
This is an optimal speaker cabinet for a
4x12" large enclosed amp with four 12-inch
speakers.
This is a double stack of two cabinets,
8x12"
each with four 12-inch speakers.
This is the built-in speaker of the amp
ORG
you selected with "Type."
Mic Setting
This simulates the microphone position. "CENTER" simulates the
condition that the microphone is set in the middle of the speaker
cone. "1-10 cm" means that the microphone is moved away from the
center of the speaker cone.
Mic Level
Adjusts the volume of the microphone.
Direct Level
Adjusts the volume of the direct sound.
Amb Pre-Dly
This parameter adjusts the delay between the original sound and the
output of ambience (i.e., room reflections).
Amb Size
This parameter adjusts the sound of the ambience by varying the
room size. Larger values produce longer ambience and increase the
sense of spaciousness.
Amb Density
This parameter adjusts the density of the ambience. Larger values
produce a denser sound.
Amb HF Damp DARK, NORMAL, BRIGHT
This parameter adjusts the tone of the ambience.
DARK:
High frequencies decay relatively quickly, producing a darker
sounding ambience.
NORMAL:
This setting produces ambience with a standard sound.
BRIGHT:
High frequencies decay relatively slowly, producing a brighter
sounding ambience.
Amb Level
Adjusts the volume of ambience.
CENTER, 1–10 cm
0–100
0–100
0.5–50.0 ms
5.0–15.0 m
0–10
0–100