Precautions - Icom IC-M604 Instruction Manual

PRECAUTIONS

RWARNING! NEVER
AC outlet. Ths may pose a fire hazard or result n an electrc
shock.
RWARNING! NEVER
power source of more than 16 V DC or use reverse polarty.
Ths wll run the transcever.
RWARNING! NEVER
the DC plug and fuse holder. If an ncorrect connecton s
made after cuttng, the transcever may be damaged.
CAUTION: NEVER
operaton of the vessel may be hndered or where t could
cause bodly njury.
CAUTION:
Changes or modfcatons to ths devce, not
expressly approved by Icom Inc., could vod your authorty to
operate ths devce under FCC regulatons.
KEEP
the transcever and mcrophone at least 1 m (3.3 ft)
away from the vessel's magnetc navgaton compass.
DO NOT
use or place the transcever n areas wth tem-
peratures below –20°C (–4°F) or above +60°C (+140°F) or,
n areas subject to drect sunlght, such as the dashboard.
v
connect the transcever to an
connect the transcever to a
cut the DC power cable between
place the transcever where normal
DO NOT
use chemcal agents such as benzne or alcohol
when cleanng, as they may damage the transcever sur-
faces. If the transcever becomes dusty or drty, wpe t clean
wth a soft, dry cloth.
BE CAREFUL!
The transcever rear panel wll become
hot when operatng contnuously for long perods.
Place the transcever n a secure place to avod nadvertent
use by chldren.
BE CAREFUL!
The transcever and the optonal HM-157
™/HM-162*
commandmicii commandmiciii
proof constructon, whch corresponds to IPX7. However,
once the transcever or mcrophone has been dropped, wa-
terproof protecton cannot be guaranteed because of poss-
ble damage to the transcever's or mcrophone's case or the
waterproof seal.
* Equvalent to IPX8
Approved Icom optonal equpment s desgned for optmal
performance when used wth an Icom transcever.
Icom s not responsble for the destructon or damage to an
Icom transcever n the event the Icom transcever s used
wth equpment that s not manufactured or approved by
Icom.
™ employ water-