Fuse Replacement; Supplied Accessories; Antenna - Icom IC-M604 Instruction Manual

y DC POWER CONNECTOR
Connects the suppled DC power cable from ths connec-
tor to an external 13.8 V DC power source.
CAUTION: After connectng the DC power cable, cover
the connectors wth a rubber vulcanzng tape shown
below, to prevent water seepng nto the transcever.
Rubber vulcanzng
tape

■ Fuse replacement

One fuse s nstalled n the suppled DC power cable. If a
fuse blows or the transcever stops functonng, track down
the source of the problem, f possble, and replace the dam-
aged fuse wth a new, rated one.
Fuse ratng: 10 A
CONNECTIONS AND MAINTENANCE

■ Supplied accessories

The following accessories are supplied
Mounting bracket For mounting bracket
Knob bolts
Screws (5×20 mm)
Microphone Microphone hanger
and screws (3×16 mm)
Warning sticker Accessory connectors
(3 pin, 6 pin)

■ Antenna

A key element n the performance of any communcaton
system s an antenna. Ask your dealer about antennas and
the best place to mount them.
9
Flat washers (M5)
Spring washers (M5)
DC power cable
9
Sponges
47