Icom IC-M604 Instruction Manual page 51

D Radio power
(Appears when a COMMANDMIC™ s connected)
Ths tem sets the Rado power functon ON or OFF.
ON : The transcever's power s controlled by the optonal
command mcrophone. When the command mcro-
phone s turned OFF, the transcever wll also be
turned OFF automatcally.
OFF : The transcever's power s not controlled by the optonal
command mcrophone. Even f the command mcrophone
s turned OFF, the transcever wll contnue to work.
--Set Mode--
Radio Power
˘ON
OFF
D Scrambler type
(Appears when a scrambler unt s nstalled)
When an optonal scrambler unt* s nstalled, the scrambler
type can be selected n Set mode dependng on dealer settng.
--Set Mode--
Scrambler Type
UT-98
˘UT-112
* The UT-98 s a dscontnued model, and the current model
s the UT-112.
D Scrambler code
When an optonal scrambler unt s nstalled, the scrambler
code can be set dependng on dealer settng.
When the UT-112 s nstalled, 32 codes (1 to 32) can be se-
lected.
When the UT-98* s nstalled, 128 codes (0 to 127) can be
selected.
When UT-112 s nstalled
Scrambler Code
(Default: ON)
˘1
D Favorite channel
Ths tem sets the Favorte channel functon ON or OFF.
The favorte channel s programmed by the TAG channel set-
tng (p. 15).
(Default: UT-112)
ON : [Y]/[Z] keys on the mcrophone select the favorte
OFF : [Y]/[Z] keys on the mcrophone select all channels n
(Appears when a scrambler unt s nstalled)
--Set Mode--
4
≤
3
2
<CLR˘Exit / ENT˘OK>
(Default: 1)
channels n the selected channel group n sequence
when pushed.
the selected channel group n sequence when pushed.
--Set Mode--
Favorite CH
˘ON
OFF
8
SET MODE
When UT-98 s nstalled
--Set Mode--
Scrambler Code
3
≤
2
1
˘0
<CLR˘Exit / ENT˘OK>
(Default: 0)
(Default: ON)
8
45