User Channel Programming; Programming A Frequency; D Receive Frequency; D Transmit Frequency - Icom IC-M710 Instruction Manual

Hf marine transceiver

Hide thumbs Also See for IC-M710:

Service manual (72 pages)

Instruction manual (28 pages)

Instruction manual (28 pages)

Table Of Contents

Table of Contents

■ Programming a frequency

The IC-M710 has up to 160 user-programmable

channels each with channel name capability of up to

7 alphanumeric characters.

D Receive Frequency

q Select the desired user channel to be pro-

grammed.

• Channel 1 to 160 (maximum) are programmable.

w Push the [CE] key to select frequency selection

mode.

• "►" and a frequency appear on the display.

e Enter the desired frequency via the keypad with 5

or 6 digits.

• Or rotate the [CHANNEL] selector to change the fre-

quency.

r To change the operating mode (type of emission),

push [MODE] one or more times.

t Push and hold [RX] for 1 second to program the

user channel.

D Transmit frequency

q Select the desired user channel to be programmed.

w Push [TX].

• "$" blinks.

e Push [CE] to select frequency selection mode.

• "►" and frequency appear on the display.

r Enter the desired frequency via the keypad with 5

or 6 digits.

• The [CHANNEL] selector cannot be used.

• Refer to p. 24 for programmable frequency range (fre-

quency coverage transmit).

t Push and hold [TX] for 1 second to program.

y Push [TX] to clear the

D Channel name

q Select the desired user channel to be pro-

grammed.

w Push [CH/FREQ] to select channel indication.

e Push [FUNC] and then [CE].

• The channel name (alphanumeric) readout blinks.

r Rotate the [GROUP] selector to cursor position

and the [CHANNEL] selector for the message con-

tents.

• To return to the previous message, push [CE].

t Push and hold [RX] to program the message.

• Blinking stops.

•

Available characters