User Channel Programming; I Programming A Frequency; D Receive Frequency; D Transmit Frequency - Icom IC-M710RT Instruction Manual

Mf/hf marine transceiver
Hide thumbs Also See for IC-M710RT:
Table of Contents

Advertisement

5

USER CHANNEL PROGRAMMING

I Programming a frequency

The IC-M710RT has up to 160 user-programmable
channels each with channel name capability of up to 7
alphanumeric characters.

D Receive frequency

Select the desired channel to be programmed.
• Channels 1 to 160 (maximum) are programmable.
Push [CE] to select frequency selection mode.
• "s" and frequency appear on the display.
Enter the desired frequency via the keypad—5 or
6 digits.
• Or rotate the [CHANNEL] selector to change the fre-
quency.
To change the operating mode (type of emission),
push [MODE] one or more times.
Push and hold [RX] for 1 sec. to program the user
channel.

D Transmit frequency

(Not applicable for General versions)
Select the desired user channel to be programmed.
Push [TX].
$
• "
" flashes.
Push [CE] to select frequency selection mode.
• "s" and frequency appear on the display.
Enter the desired frequency via the keypad with 5
or 6 digits.
• The [CHANNEL] selector cannot be used.
Push and hold [TX] for 1 sec. to program.
Push [TX] to stop "$" from flashing.

D Channel names

Select the desired user channel to be programmed.
Push [CH/FREQ] to select channel indication.
Push [FUNC] then [CE].
• The channel name (alphanumeric) readout flashes.
Rotate the [GROUP] selector for cursor position
and the [CHANNEL] selector for name content.
• To return to the previous message, push [CE].
Push and hold [RX] to program the name.
• Flashing stops.
12
NOTE: ITU simplex channels can be programmed
as well as user channels. However, transmit fre-
quencies cannot be programmed as it is not neces-
sary.
Push [CE]
Frequency and "≈" appear.
Set frequency
Use keypad or channel selector.
Push and hold [RX]
Programming is completed.
Push [TX]
RX
"$" flashes.
Push [CE]
RX
Push and hold [TX]
RX
after entering a
frqeuency
Push [FUNC]
RX
then [CE]
TX
"$" flashes.
Rotate [GROUP]
RX
and [CHANNEL]
TX
to select cursor and
character
Push [RX]
RX
TX
ALM
RX
D U P
AGC
TX
DSC
ALM
RX
D U P
AGC
TX
DSC
ALM
RX
D U P
AGC
TX
DSC
ALM
D U P
AGC
TX
DSC
F
ALM
D U P
AGC
TX
F
DSC
ALM
D U P
AGC
TX
DSC
F
ALM
D U P
AGC
DSC
F
ALM
D U P
AGC
F
DSC
ALM
D U P
AGC
DSC
F
F
F
F

Advertisement

Table of Contents
loading

Table of Contents