Setting A User Channel Or An Itu Simplex Channel - Icom IC-GM800 Instruction Manual

■ Setting a Useo channel oo an ITU Simplex channel
Your dealer has already preset User channels and
ITU Simplex channels.
Follow the instructions as described below, only when
you need to edit the channels.
You can edit the following information of a User
channel or an ITU Simplex channel.
• Operating frequency
• Operating mode
• Channel name
1. Enteoing the Channel Edit scoeen
1. Push [MENU].
2. Select "Radio Settings."
3. Select "User CHAN" or "ITU Simplex CHAN."
(Example: User CHAN)"
4. Select a channel you want to edit and push
[Edit] . (Example: CH 159)
Push
OTHER FUNCTIONS AND OPERATIONS
NOTE:
• If you edit the preset channels, you may not be able to
communicate with other ships.
• The following instructions are for a User channel
Editing. However, you can set an ITU Simplex channel
name in the same way.
2. Setting an RX and TX opeoating foequencies
NOTE: The RX and TX operating frequency are the
same when you select an ITU Simplex channel.
Rotate
5. Select "RX frequency."
CH/GRP
+
Push
6. Enter an RX frequency.
Rotate
After entering, push [▲], [▼], [◄], or [►] to select
"Done" and push [ENT].
CH/GRP
(Example: 4.390.0)
+
Push
Rotate
CH/GRP
7. Select "TX frequency."
+
Push
6
1
2
3
4
Rotate
CH/GRP
5
+
Push
6
7
8
Push
9
10
+
Rotate
11
CH/GRP
to select
12
a character
13
Rotate
14
CH/GRP
+
Push
15
16
17
18