Selecting A Channel/Frequency; Selecting A Channel; D Using The Channel Selector - Icom IC-M710 Instruction Manual

SELECTING A CHANNEL/FREQUENCY

Selecting a channel

■
The transceiver has 160 user channels and ITU
channels. However, the number of user channels
can be optionally restricted and ITU channels are
not available with some versions.
CHANNEL INDICATION
CH/F/REQ
FREQUENCY INDICATION
NOTE: Channel name (alphanumeric) does not appear during
channel indication according to set mode settings (p. 14).

D Using the channel selector

The transceiver has two large controls for group se-
lection and channel selection. The [GROUP] selec-
tor changes channels in 20 channel increments and
selects ITU channel groups*; and the [CHANNEL]
selector selects each channel.
q Be sure no "►" indicator appears on the display.
RX
D U P
►
If appears, push [CE] and then it will disappear.
w Rotate the [GROUP] selector to select the de-
sired channel group as shown at right and/or
below.
e Rotate the [CHANNEL] selector to select the de-
sired channel.
CHANNEL GROUP
CHANNEL NO. DESCRIPTION
User channels
([GROUP] selec-
1 to 160
tor changes in 20
channels steps)
4 MHz ITU duplex
401 to 427
channels
4 MHz ITU simplex
4 -1 to 4 - 9
channels
6 MHz ITU duplex
601 to 608
channels
6 MHz ITU simplex
6 - 1 to 6 - 9
channels
8 MHz ITU duplex
801 to 832
channels
RX
D U P
RX
D U P
CHANNEL SELECTION MODE
Channel can be selected
D U P
CHANNEL NO. DESCRIPTION
8 MHz ITU simplex
8 - 1 to 8 - 9
channel
12 MHz ITU duplex
1201 to 1241
channel
12 MHz ITU simplex
12 - 1 to 12 - 9
channels
16 MHz ITU duplex
1601 to 1656
channels
16 MHz ITU simplex
16 - 1 to 16 - 9
channel
18 MHz ITU duplex
1801 to 1815
channel
18 MHz ITU simplex
18 - 1 to 19 - 1
channels
NOTE: When Channel 0 and/or 2182 kHz is se-
lected with the [2182KHz] switch, channel se-
lection is NOT possible. In such a case, push
[2182KHz] in advance.
RX
►
CE
RX ►
FREQUENCY SELECTION MODE
Frequency can be selected
[EXAMPLE]: Selection of the [GROUP] selector
1
J3E
WWV
21
J3E
KMI
41
J3E
WOM
61
J3E
WOO
RX
•
D U P
•
•
•
121
J3E
FAX
141
J3E
SHP/SHP
*AII ITU channels are not available with some versions and
ITU FSK channels can be hidden using set mode. (p. 13)
CHANNEL NO.
2201 to 2253
22 - 1 to 22 - 9
2501 to 2253
25 - 1 to 25 - 9
ITU FSK duplex channels (SITOR use)
4001 to 25040
3
D U P
D U P
401
J3E
4.357.0
4 – 1
J3E
4A LTD
601
J3E
6.501.0
•
•
•
•
2501
J3E
26.145.0
25 – 1
J3E
4001
J3E
4.210.5
D U P
DESCRIPTION
22 MHz ITU duplex channels
22 MHz ITU simplex channels
25 MHz ITU duplex channels
25 MHz ITU simplex channel
(No group separation)
6