Display - Icom IC-M710 Instruction Manual

2
PANEL DESCRIPTION

■ Display

ALM
RX
q
TUNE
w
TX
e
q RECEIVE INDICATOR
Appears while receiving and when the squelch is
open.
w TUNE INDICATOR (p. 9)
Flashes while the connected antenna tuner, such
as Icom's AT-130, is being tuned.
• Tuning starts when transmitting on a new frequency or
pushing the [TUNE] switch.
e TRANSMIT INDICATOR
➥ Appears when transmitting.
➥ Blinks when the [TX] key is pushed for transmit fre-
quency programming. (p. 12)
r S/RF METER
➥ Shows the relative received signal strength
while receiving.
➥ Shows output power while transmitting.
t CHANNEL NAME READOUT
➥ Shows the pre-programmed channel name (al-
phanumeric) during channel indication. (p. 6)
➥ Shows the transmit frequency during frequency
indication. (p. 6)
y SQUELCH INDICATOR (p. 10)
Appears when the squelch is ON.
u SCAN INDICATOR (p. 7)
Appears when the scan function is in use.
• Pushing [SCAN] starts and stops the scan.
5
!4
!5
►
D U P
►
0
1 2
r t
!3 !2
SIMP
SQL NB
SCAN
3 4
y
i FUNCTION INDICATOR
Appears when the [FUNC] switch is pushed.
Some switches activate secondary functions.
•
o NOISE BLANKER INDICATOR (p. 10)
Appears when the [NB] switch is turned ON.
!0 AGC OFF INDICATOR (p. 10)
Appears when the [AGC] switch is pushed to indi-
cate the AGC function is deactivated.
!1 MODE READOUT
Shows the selected operating mode (type of emis-
sion).
!2 SPEAKER OFF INDICATOR
Appears when the [SPEAKER] switch is pushed to
indicate the front panel speaker is deactivated.
!3 CHANNEL READOUT
➥ Shows the selected channel number during
channel indication. (p. 6)
➥ Shows the receive frequency during frequency
indication. (p. 6)
!4 SIMPLEX/DUPLEX INDICATORS
These appear to show whether the selected chan-
nel is simplex or duplex.
!5 FREQUENCY INDICATORS (p. 8)
Appears when the frequency entry condition is se-
lected for frequency selection.
The [CE] key toggles the indicator ON or OFF.
•
!1
AGC AGC
!0
o
O
A
i
u