Hitachi WJ200 Series Instruction Manual page 73

2−28
[Setting example]
After power ON, changing from 0.00 display to change the b083 (carrier frequency) data.
Press [ESC] key to show
the function code
d001
ESC
F001
ESC
b001
b083
Function code dxxx are for monitor and not possible to change.
Function codes Fxxx other than F004 are reflected on the performance just after changing the data
(before pressing SET key), and there will be no blinking.
ESC key
SET key
key
key
Note
Keep pressing for more than 1 second leads to d001 display, regardless the display situation. But note that
the display will circulates while keep pressing the [ESC] key because of the original function of the key.
(e.g. F001 A001
ESC
SET
Press [ESC] key to move on to the function group
Press [ESC] key twice to move on to the function group
Press Up key to change increase function code (
Press SET key to display the data of
SET
ESC
SET
Press SET key to set
and save the data
SET
:Fix and stores the data and moves back to the function code
:Cancels the change and moves back to the function code
ESC
When a function code is shown...
Move on to the next function group
Move on to the data display
Increase function code
Decrease function code
b001 C001 displays 50.00 after 1 second)
...
d001
Data of will be shown on the
display after the first power ON
0.00
F001
b001
b083
5 0
Display is solid lighting.
.
Press up key to increase the
5.0
data (
When data is changed, the display
12 0
. starts blinking, which means that new
data has not been activated yet.
Cancels the change and moves back to
the function code
Fix and stores the data and moves back
to the function code
Increase data value
Decrease data value
b001.
b083)
12.0)
When a data is shown...