installing the dvR
install the haRd dRive
1. Use the provided key to open the DVR's Hard Disk Drive (HDD) drawer illustration
2. Remove screws and carefully open the top cover of the DVR illustration
3. Firmly connect the DVR's power cord into its corresponding receptacle on the hard
drive illustration
4. Securely insert the data cable into its matching port on hard drive illustration
5. Carefully replace the top cover of the DVR and re-attach screws
ConneCt dvR to CameRas
1. Connect the camera cable to the Video Input port on the DVR illustration
2. Follow same procedure for each camera
3. To connect a PTZ speed dome to the DVR System, connect the PTZ Camera data
cables to your RS485 A & B ports. illustration See PAGEXXX for additional PTZ
Camera configuration instructions.
ConneCt dvR to exteRnal monitoR
Using the included BNC to RCA cable, connect the monitor to the Video Output port of
the DVR illustration
ConneCt poWeR supplY
1.
Connect cameras' power supply to outlet(s) illustration
2.
Connect DVR power supply to outlet illustration
WaRning!
Caution: Always turn off the DVR's power before installing
or removing the hard drive!
WaRning!
Caution: Only use the power adapter supplied with your DVR
System. Failure to do so may result in system failure.