PART 3 - CONNECTING THE DVR TO YOUR DISPLAY
To Connect to a TV:
1.
Plug the BNC to RCA adapter in to Video Out port then connect the RCA cable
(not included) to the DVR.
2.
Connect the other end of the RCA cable to the Video Input on the TV.
To Connect to a Computer Monitor:
3.
Plug the VGA cable (not included) to the VGA port on the DVR.
4.
Connect the other end of the VGA cable to the monitor.
NOTE! You may use both a video monitor and a television
simultaneously with this DVR.
2
4
1
3
2
IMPORTANT!
The default resolution of this DVR is 1024x768 pixels. Some
monitors smaller than 19" may have problems displaying this resolution.
AUDIO OUT
2
DC 12V
VGA
1
VIDEO OUT
1
3
4
PART 4 - DVR CONTROLS
This DVR can be controlled through the USB mouse, the remote control or by using the buttons on
the front panel of the device. We have found that the majority of our customers prefer to operate
their DVRs using the USB mouse because of its ease of use and flexibility and our manual is set up
with this in mind. The remote control allows you to perform most of the day-to-day functions from a
convenient distance. It functions as a typical remote control with additional buttons allowing you to
navigate through menus and control functions. We recommend that you configure your DVR using
the mouse controls, reserving the remote control for operations such as live viewing, file search and
playback.
FRONT PANEL
1
Number
Item
Single Channel Viewing Mode: Opens Color Adjustment
Function
1
Button
Virtual Keyboard: Backspace function
2
IR Sensor
Infrared Receiver for Remote Control
3
Escape Button Exit any menu or current operation
Viewing Mode: Go To Menu
4
Enter Button
In Menu: Acts as mouse click
Navigate through menus.
Directional
5
Change selections in pull down menus (Up/Down buttons)
Buttons
Toggle settings (Up/Down buttons)
6
Power Button
Puts DVR into Standby mode or wakes it up.
Alarm: Not functional on this model
Net: Red light indicates that network connection is lost
7
Status Lights
HDD: Red light indicates that hard drive is operating
Power: Red light indicates that DVR is powered up
For use with flash drive when backing up or updating
8
USB Port
firmware. Not for use with mouse.
2
3
4
5
7
Function
6
8