Trobleshooting; Video Loss; Alarm Sounds; Change To Full Screen View - Q-See QR4714 User Manual

tRobleshooting

video loss:

If the system does not detect a video input, you will receive a "Video Loss" message for each
IMAge 3
camera as depicted in . Once the cameras have been connected, the Main Interface
IMAge 2
screen will display a live feed from each camera in its respective box as shown in .

alarm sounds:

If the first box on the Main Interface screen displays an "H" and an alarm sounds, the DVR
does not detect a HDD. To turn the alarm off, navigate to [Device Management Alarm setting].
Choose the "off" option next to "HDD loss, HDD space not enough and alarm output". Return
to the section on installing the DVR and ensure the HDD is installed correctly.

Change to Full sCReen vieW

To change to a full screen view on one of the cameras, from the Main Interface screen, posi-
IMAge 4
tion the mouse over an image and double-click, as shown in .
IMAge 3
Double-click again to return to the multi-camera view ( ).
NEED IMAGE
IMAge 3 IMAge 4