DVR INSTALLATION
2. DVR INSTALLATION GUIDE
2.1 FRONT PANEL
1. THE FUNCTIONS OF BUTTONS AND CONNECTORS ON FRONT PANEL
Item
Name/Symbol
Number
1
STANDBY
2
IR SENSOR
3
LED INDICATORS
CHANNEL/NUMBERS/
4
PLAYBACK
MENU
5
EXIT
6
NAVIGATION/OK
7
DURING PLAYBACK
8
PRESS:
Press to set the system in standby mode.
IR Receiver for remote control.
Shows status of hard drive, recording, alarm, HDD full and network.
Press buttons 1-8 to view the selected channel full-screen; press buttons 1-0 to input
passwords and user IDs.
Press to open/close the main menu.
In menus, press to confirm selections; in PTZ mode, press to change
the navigation buttons to control a connected PTZ camera (not
OK
included)
▲
Press to move cursor up; in PTZ mode, press to pan camera up.
▼
Press to move cursor down; in PTZ mode, press to pan camera down.
◄
Press to move cursor left; in PTZ mode, press to pan camera left.
►
Press to move cursor right; in PTZ mode, press to pan camera right.
Connect a USB flash drive to the top port for data backup and firmware upgrades
connect a USB mouse to the bottom port.
Increase reverse playback speed 1X, 2X, 4X.
Press to freeze playback to one frame, then press again to advance
frame-by-frame.
Press to start playback
Press to slow playback speed by 1/2, 1/4, 1/8.
Press to increase forward playback speed 1X, 2X, 4X.
2 |
P a g e
Model #: QS218
Description