Password - Q-See QR4714 User Manual

5. Select the time zone format (see
zone)
6. Enable daylight savings time if applicable
7. Select DEFAULT to reset all values to the original factory installed settings
8. Select APPLY to save settings
9. Select EXIT to return to SYSTEM SETUP menu
*Note: The correct time zone must be selected from the Time Zone drop-down menu or the time
management software will not run properly. Follow the time zones as indicated on
more information about time zones can be found at www.time.gov.
IMAge 27

password

The Password Setup dialog box allows the user to enable or disable password protection and
set up an administrator password.
1. From the Main Menu, select SYSTEM to open the SYSTEM SETUP menu
2. Select PASSWORD to open the PASSWORD SETUP menu (
3. Change PASSWORD ENABLE setting to ON
4. Enter USER PASSWORD (up to 6 characters)
5. Enter ADMIN PASSWORD (up to 6 characters)
6. Select APPLY to save settings
7. Select EXIT to return to the SYSTEM SETUP menu
IMAge 27
for assistance in selecting the correct time
IMAge 27. If necessary,
IMAge 28
)