Set Alarm - Q-See QR4714 User Manual

6. Select EXIT to return to the SYSTEM SETUP menu
HDD Format formats the HDD by erasing all of the data and files that are on the disc. Please
note: after installing a new hard drive, files cannot be recorded until the hard drive has been
formatted. To format the hard drive, use the following steps:
1. From the Main Menu, select DEVICE to open the DEVICE MANAGEMENT menu
IMAge 33
( )
2. Select HDD to open the HDD MANAGEMENT menu (
3. Click on HDD FORMAT button
4. A warning will appear asking: "Formatting HDD will erase all data. Are you sure you
wish to format?"
5. Click OK to continue
6. When the formatting has been completed, a SUCCESSFUL FORMAT message will
appear and the system will automatically restart.
USB Format formats USB devices by erasing all of the data and files that are on the USB
drive. To format the USB drive, use the following steps:
1. From the Main Menu, select DEVICE to open the DEVICE MANAGEMENT menu
IMAge 33
( )
2. Select HDD to open the HDD MANAGEMENT menu (
3. Click on USB FORMAT button
4. A warning will appear asking: "Formatting USB will erase all data. Are you sure you
wish to format?"
5. Click OK to continue
6. When the formatting has been completed, a SUCCESSFUL FORMAT message will
appear and the system will automatically restart.

set alarm

Alarm configuration options include: alarm buzzer notification for video loss, HDD connectivity
problem alerts, motion detection, and email notifications.
IMAge 34
)
IMAge 34
)