Motion Detect - Q-See QR4714 User Manual

4. Select ON next to the SSL button to enable an extra layer of protection to help prevent
the email account and password from being hacked.
5. Generally the SMTP PORT should be set at 25, however, check with your email server
for verification of the preferred SMTP PORT
6. Enter the SMTP server address associated with your email into the SMTP field
7. Enter the sender's email address into the SEND EMAIL field. This email address should
be consistent with the server (ie. If the email address is aaa@gmail.com, the server
should be smtp.gmail.com)
8. Enter the password associated with the sender's email address into the SEND PW field
9. Enter the email address where you want the email notifications to be sent into the
RECV EMAIL field (*emails can be deleted after being viewed to avoid overburdening
the email account)
Note: If you do not know your SMTP and SSL settings, you can obtain the correct settings
from your email server provider.

motion detect

This DVR can be configured to detect motion using the following steps:
1. From the Main Menu, select DEVICE to open the DEVICE MANAGEMENT menu
IMAge 33
( )
2. Click on the MOTON icon to open the MOTION DETECTION dialogue box (
3. CH01-CH04 refers to each camera, which can be configured separately by defining
the settings under each column
4. Select ON or OFF from the STATUS drop down menu to enable or disable motion
detection on each camera
IMAge 36 IMAge 37
IMAge 38
)