Advertisement
Quick Links
Download this manual
See also:
User Manual
Package Contents:
1. 1-17" TFT w/built-in 4 Channel MPEG4 DVR
2. 4 - CCD Outdoor Night Vision Cameras
3. 1- Remote control
4. 1- Power Cable
5. 4- BNC Cables (60 foot)
6. 1- USB cable
7. 1- VGA Cable (PC Monitor)
8. 1- Installation CD for Remote Client Program
9. Hard drive (Optional)
10. 1- set key for the hard drive bay
11. Manual
Tech Support:
Website: www.q-see.com click on support.
Email : ts@dpsi-usa.com
Phone: Toll Free: 877-998-3440 or 714-998-3440 Monday-Friday 9-5 PST.
Ports on Back of the Monitor:
4 CH DVR Quick Installation Guide
MODEL QT17DVR4C
Version: 6214C-P01.010
4 Video In for Cameras
2 Video Out for TV
1 USB port
1 Network input
2 Feeds Audio In (R/L Channels)
2 Feeds Audio Out (R/L Channels)
1 VGA output for computer monitor
1 Alarm connection (input/output)
On/Off Switch
Power Connection
Advertisement
Related Manuals for Q-See QT17DVR4C
Summary of Contents for Q-See QT17DVR4C
-
Page 1: Package Contents
9. Hard drive (Optional) 10. 1- set key for the hard drive bay 11. Manual Tech Support: Website: www.q-see.com click on support. Email : ts@dpsi-usa.com Phone: Toll Free: 877-998-3440 or 714-998-3440 Monday-Friday 9-5 PST. Ports on Back of the Monitor:... -
Page 2: Installation
Installation: 1. Attach the camera to the BNC connector and the power connection. Push the red connector (1) with long chrome head Line up the slots on the yellow BNC connector (1) with the black tip into the other grey connector(2). with the tabs on the grey connector(2), then push in and turn the head on the yellow connector clockwise to lock it in place. - Page 3 1. Connect the other end of the camera cable to the camera's power supply and to the Video IN on the DVR Line up the opennings on the yellow BNC connector (1) Push the connector from the power supply (1) into the with the stubs on the top &...
- Page 4 To Record With Your DVR : There are 3 modes for recording. 1. Manual recording: Push the RECORD button. It will record all the time until you stop it by pushing the RECORD button again. 2. Motion Detection Recording: This will record only when there is a Motion in front of the camera. 3.
- Page 5 To Set Up Time Schedule Recording: Use the Remote Control and push SETUP and follow the instruction below: 2. Use the directional arrows to select "Setup" 1. Select "Work Set" using the directional arrows and hit ENTER and hit ENTER. 3.
- Page 6 To Playback the Recording: 1. Using the remote control, push CHECK 2. Select "All Record" and hit ENTER. Select "All Record" and hit the ENTER button. You can now use the number pad to enter a specific date and time then use the arrow keys to select "Start"...
- Page 7 To Back Up the files: You can use the USB cable and connect it directly from DVR to USB port on the PC and either copy it your PC hard drive or play it back on your PC 3. Use the directional 2.
- Page 8 To Monitor the Camera on a Remote Computer: Here is the connection diagram: To monitor your camera on a remote computer you need to forward your IP port to the remote computer. There are instructions on how to do this on the website http://www.portforward.com based on the brand and model of router you have.
- Page 9 The QT17DVR4C comes with Remote Client software to allow you to monitor the system, record, and playback through a remote PC through port forwarding. To Install the DVR6214 Remote Client Program 1. Insert the Remote Client Program CD into the CD/DVD-ROM drive on the computer 2.
- Page 10 You can also connect to the DVR using the Internet Explorer web browser by typing your WAN IP & the Web port from the Network Set ( EX: http://75.4.207.211:8100/) on the browser's address bar. You need to allow Pop-ups. To do so go to the Internet Explorer tool bar and select the "tools" option, then select the "Pop up Blocker" option and select "Turn Off Pop-up Blocker".