Aci Measure Setup - Fluke 8588A Operator's Manual

8588A/8558A
Operators Manual
 (Measure Setup): The Measure Setup softkey in ACI menu has
parameters that can be set up to make ac current measurements. Parameter
choices are:
•
•
•
•
•
•
Make the selection with the softkeys or use the navigational keys to highlight the
selection and push . See ACI Measure Setup.

ACI Measure Setup

There are parameters in the ACI Measure Setup menu that can be changed.
•
This coupling affects the signal at the output of the Products internal
current shunt, as the input signal is always directly connected to the
Product internal current shunt.
•
28
Signal path coupling
Secondary Reading
Frequency path coupling
Frequency path bandwidth limit
Period/Frequency resolution
Peak to peak method
Signal path coupling: Choose  (AC) or  (DC).
Secondary Reading: In the ACI function, a secondary reading can be
shown. The menu choices are:
o  (OFF) (none)
o  (Frequency)
o  (Period)
o  (Pk to Pk)
o  (More) additional Secondary Reading parameters
  (Pk to Pk) (repeated here for ease of use)
  (Crest Factor)
  (Positive Peak)
 (Negative Peak)

 (More) Push to return to the primary menu parameters.

When Pk to Pk is selected, the last submenu in ACV Measure Setup, Peak
to peak method becomes active. (see below).
Note