Table of Contents
Advertisement
Input/Output Connection Specifications
MAINS INLET
EQUIPMENT OUTLET
(
TEST RECEPTACLE
SIGNAL CONNECTIONS
-
APPLIED
PART CONNECTIONS
-232
RS
SERIAL PORT
Computer-Setup Specifications
SERIAL CABLE
BAUD RATE
START BITS
STOP BITS
DATA BITS
:
Standard IEC 60320-1 / C20 Mains inlet rated at 16 A and 250 V for
Class-1 equipment in cold conditions
Specific to version of instrument:
):
AS 3112-1993 (Australia)
BS 1363A (English – United Kingdom)
NEMA 5-15R (English – United States)
Schuko CEE7 (English)
Schuko CEE7 (French, German, Italian and ROW [International])
:
Three safety-style banana jacks:
RED – signal input / output connection
GREEN – direct connection to Equipment Outlet Earth
BLACK – signal input / output connection for Dual-Lead-Voltage and
Dual-Lead-Leakage tests
:
Ten banana jacks that enable the connection of applied-parts (in some
cases ECG) leads to the meter circuit: RA (or R and AP1), RL (or N and
AP2), LA (or L and AP3), LL (or F and AP4), and V1-V6 (or C1-C6 and
AP5 - AP10)
:
A serial interface to be used with the Ansur ESA601 Plug-in software, or
in Remote Mode, enables remote operation of the ESA601, and provides
a download port for processor firmware. In Local Mode, this port can be
used to output test results to a serial ASCII printer when the PRINT
SWITCH is pressed.
Null modem is required (P/N 75029)
:
Bidirectional (Data Communications Equipment) RS-232
PORT
:
9600
:
None
PARITY
1
:
1
:
8
Appendices
A
Specifications
A-3
Hide quick links:
Advertisement
Table of Contents
