Interpretation Of Messages - Fluke 8842A Instruction Manual

8842A
Instruction Manual
DEVICE-DEPENDENT MESSAGES
Single-character Commands
Bn Cn Dn Fn Gn Pn Rn Sn Wn Xn Yn Zn
Numeric-entry Characters
NE. + - 0123456789
Terminators
CR
LF
GET
EOI
INTERFACE MESSAGES
Address Messages
MLA
MTA
UNL
UNT
Universal Commands
ATN
DCL
IFC
LLO
REN
SPD
SPE
Addressed Commands
GET
GTL
SDC
Ignored Characters
, comma
Space
All Other ASCII non-printing characters (except CR
and LF)
ERROR-PRODUCING CHARACTERS
! " # $ ' ( ) / : < = > ; @ [ / ] ~
HIJKLMOQUV
3-22
Each of these commands requires the single
numeric digit (n).
These characters are used for entering numbers
Carriage Return
Line Feed
Group Execute Trigger
End Or Idenity (used as END/DAB)
My Listen Address
My Talk address
Unlisten
Untalk
Attention
Device Clear
Interface Clear
Local Lockout
Remote Enable
Serial Poll Disable
Serial Poll Enable
Group Execute Trigger
Go to Local
Selected Device Clear
These characters may be inserted anywhere in a
character string without affecting the string.
Character string without affecting the string.
They carry no special meaning and are ignored by
the 8842A. They are not placed in the input buffer.
The error annunciator is displayed on the 8842A
front panel when one of these characters is
encountered (ERROR 71).
Figure 3-7. Interpretation of Messages