Introduction; How To Obtain Parts; Manual Status Information - Fluke 8842A Instruction Manual

7-1. INTRODUCTION

This section contains an illustrated list of replaceable parts for the 8842A. Parts are listed
by assembly; alphabetized by reference designator. Each assembly is accompanied by an
illustration showing the location of each part and its reference designator. The parts lists
give the following information:
Reference designator
An indication if the part is subject to damage by static discharge
Description
Fluke stock number
Manufacturers supply code (code-to-name list at the end of this section)
Manufacturers part number or generic type
Total quantity
Any special notes (i.e., factory-selected part)
A * symbol indicates a device that may be damaged by static
discharge.

7-2. HOW TO OBTAIN PARTS

Electrical components may be ordered directly from the manufacturer by using the
manufacturers part number, or from the Fluke Corporation and its authorized
representatives by using the part number under the heading FLUKE STOCK NO. In the
U.S., order directly from the Fluke Parts Dept. by calling 1-800-526-4731. Parts price
information is available from the Fluke Corporation or its representatives. Prices are also
available in a Fluke Replacement Parts Catalog which is available on request.
In the event that the part ordered has been replaced by a new or improved part, the
replacement will be accompanied by an explanatory note and installation instructions, if
necessary.
To ensure prompt delivery of the correct part, include the following information when
you place an order:
Instrument model and serial number
Part number and revision level of the pca containing the part
Reference designator
Fluke stock number
Description (as given under the DESCRIPTION heading)
Quantity

7-3. MANUAL STATUS INFORMATION

The Manual Status Information table that precedes the parts list defines the assembly
revision levels that are documented in the manual. Revision levels are printed on the
component side of each pca.
CAUTION
List of Replaceable Parts
INTRODUCTION
7
7-3