Decal - Weider PRO 9645 User Manual

m
47.
Press two 3/4" Round Inner Caps (34) into
each Pad Tube (28).
Insert a Pad Tube (28) into the Front Seat
Frame (36). Slide a Foam Pad (30) onto each
end of the Pad Tube.
Insert the other Pad Tube (28) into the Leg
Lever (29). Slide a Foam Foam Pad (30) onto
each end of the Pad Tube.
48, Remove the backing from the PRO 9645
decal and apply it to the home gym system as
shown.
Make sure that all parts have been propedy
tightened. The use of the remaining parts will
be explained in HOW TO USE THE HOME
GYM SYSTEM, beginning on page 22 of this
manual.
Before using the home gym system, pull each
cable a few times to be sure that the cables
move smoothly over the pulleys. If one of the
cables does not move smoothly, find and cor-
rect the problem. IMPORTANT: If the cables
are not properly installed, they may be
damaged when heavy weight is used. See
the CABLE DIAGRAMS on pages 26 and
27 of this manual for proper cable routing.
If there is any slack in the cables, you will
need to remove it by tightening the cables.
See TROUBLE-SHOOTiNG AND MAINTE-
NANCE on p_ge 25.
48
.PRO 9645
21