Weider PRO 4900 User Manual page 8

7, 7
8,
9,
Attach the Left Upright (5) to the Left Base (2)
with the two indicated M8 x 75mm Carriage BoUts
(84) and two M8 NyUonLocknuts (115), Do not
tighten the Locknuts yet,
HoUdthe Left Top Frame (8) between the Left
Upright (5) and the Rear Upright (6), Attach the
Pull-up Arm (19) and the Left Top Frame to the
Rear Upright with two M8 x 83mm BoUts(89), two
M8 Washers (117), and two M8 NyUon Locknuts
(115), Make sure the indicated handles point
up, Do not tighten the Loeknuts yet,
Attach the Left Top Frame (8) to the Left Upright
(5) with two M8 x 83mm BoUts(89), the Left
Upright Hate (37), and two M8 NyUon Locknuts
(115), Note: The Left Upright Plate is wider
than the Rear PJate (not shown}, Do not tight-
en the Loeknuts yet,
115
115
x\ xX
, \
117 '
\
j,
115
5--:
8
115
115
37
8