Weider PRO 4900 User Manual page 22

65, Attach the Lock Hate (80) to the Right Seat
Frame (9) with an M8 x 69mm ShouUder BoUt (87),
an M8 Washer (117), and an M8 NyUonLocknut
(115), Do not overtighten the Locknut; the
Lock Plate must be able to pivot easily.
Attach the Leg Pin (83) to the Right Seat Frame
(9) with an M4 x 16mm SeUfotapping Screw (113),
Unsert the Leg Pin through the Lock Hate (80)
and the Leg Lever (11),
66, Press the two Shroud Covers (26) onto the Front
Shroud (15), which has a taller opening than the
Rear Shroud (not shown), Attach the Shroud to
the Right Top Frame (7) and the Right Base (1)
with four M6 x 22mm BoUts(10% four M6
Washers (132), and four M6 NyUonLocknuts
(135), Be careful not to scratch yourself when
reaching through the hole in the Shroud.
Repeat this step with the Rear Shroud (not
shown).
65
//
113
135
\
\\
\
26
132
109 -15
i
26
132
109
f
22