Table of Contents
Advertisement
56, Wrap the Press CaMe (69) around a 90mm
Pulley (39), Attach the Pulley, two HaUl Finger
Guards (42), a Small CaMe Trap (48), and an
MIO Washer (116) to the Left Upright (5) with an
MIO x 108mm BoUt(99), an MIO Washer (116),
and an MIO NyUonLocknut (114), Make sure the
CabJe Trap and Finger Guards are oriented
as
shown.
57, Wrap the Press CaMe (69) around a 90mm
PuUUey (39), Attach the PuUUey, two HaUl Finger
Guards (42), a SmaUU CaMe Trap (48), and an
MIO Washer (116) to the Press Frame (13) with
an MIO x 135mm BoUt (98), Make sure the Cable
Trap and Finger Guards are oriented
as
shown.
58, Wrap the Press CabUe (69) around a "V"opuUUey
(40), Attach the "V"-puUUey, t wo HaUl Finger Guards
(42), a CabUe Trap (49), and an MIO Washer
(116) to the Left Upright (5) with an MIO x 68mm
BoUt(93) and an MIO NyUon Locknut (114), Make
sure the Cable Trap and Finger Guards are
oriented
as shown.
59, Wrap the Press CabUe (69) around a 90mm
Pulley (39), Attach the Pulley, two HaUl Finger
Guards (42), a Small CaMe Trap (48), and an
M10 Washer (116) to the Press Frame (13) with
the MIO x 135mm Bolt (98) used in step 57 and
an MIO Nylon Locknut (114), Make sure the
Cable Trap and Finger Guards are oriented
as
shown.
60, Wrap the Press Cable (69) under a 90mm Pulley
(39), Attach the Pulley, two MIO Washers (116),
and two Half Finger Guards (42) to the Left Base
(2) with an MIO x 52mm Bolt (102) and an MIO
Nylon Locknut (114), Make sure the Finger
Guards are oriented
as shown.
56
57
58
114_
98
42
69
116
42
39
114
2
114
20
Hide quick links:
Advertisement
Table of Contents
