Rip Configuration Example - Extreme Networks ExtremeWare XOS Guide Manual

Interior Gateway Protocols

RIP Configuration Example

Figure 36 illustrates a BlackDiamond switch that has three VLANs defined as follows:
• Finance
— Protocol-sensitive VLAN using the IP protocol.
— All ports on slots 1 and 3 have been assigned.
— IP address 192.207.35.1.
• Personnel
— Protocol-sensitive VLAN using the IP protocol.
— All ports on slots 2 and 4 have been assigned.
— IP address 192.207.36.1.
• MyCompany
— Port-based VLAN.
— All ports on slots 1 through 4 have been assigned.
Figure 36: RIP configuration example
1 2
192.207.35.0
Finance
1 2
IP
NetBIOS
IP
NetBIOS
The stations connected to the system generate a combination of IP traffic and NetBIOS traffic. The IP
traffic is filtered by the protocol-sensitive VLANs. All other traffic is directed to the VLAN MyCompany.
196
3 4 A B
192.207.35.1 192.207.36.1
MyCompany
3 4
IP
NetBIOS
IP
NetBIOS
5 6 7 8
192.207.36.0
Personnel
= IP traffic
= NetBIOS traffic
EX_047
ExtremeWare XOS 10.1 Concepts Guide