Extreme Networks ExtremeWare XOS Guide Manual page 116

Security
Table 21: ACL Match Conditions
Match Conditions
source-address <prefix>
destination-address <prefix>
protocol <number>
Source-port {<number> |
<range>}
Destination-port {<number> |
<range>}
TCP-flags <bitfield>
IGMP-msg-type <number>
ICMP-type <number>
116
Description
IP source address and mask.
IP destination address and mask.
IP protocol field. In place of the numeric value, you can specify
one of the following text synonyms (the field values are also
listed): egp(8), esp(5), gre(47), icmp(1), igmp(2),ipip(4), ipv6(41),
ospf(89),pim(102), rsvp(46),tcp(6), or udp(17)
TCP or UDP source port. In place of the numeric value, you can
specify one of the text synonyms listed under destination port.
TCP or UDP destination port. Normally, you specify this match in
conjunction with the protocol match to determine which protocol
is being used on the port.In place of the numeric value, you can
specify one of the following text synonyms (the field values are
also listed): afs(1483), bgp(179), biff(512), bootpc(68),
bootps(67), cmd(514), cvspserver(2401), DHCP(67), domain(53),
eklogin(2105), ekshell(2106), exec(512), finger(79), ftp(21),
ftp-data(20), http(80), https(443), ident(113), imap(143),
kerberos-sec(88), klogin(543), kpasswd(761), krb-prop(754),
krbupdate(760), kshell(544), idap(389), login(513),
mobileip-agent(434), mobileip-mn(435), msdp(639),
netbios-dgm(138), netbios-ns(137), netbios-ssn(139), nfsd(2049),
nntp(119), ntalk(518), ntp(123), pop3(110), pptp(1723), printer
(515), radacct(1813), radius(1812), rip(520), rkinit(2108),
smtp(25), snmp(161), snmptrap(162), snpp(444), socks(1080),
ssh(22), sunrpc(111), syslog(514), tacacs-ds(65), talk(517),
telnet(23), tftp(69), timed(525), who(513), xdmcp(177),
zephyr-clt(2103), or zephyr-hm(2104).
TCP flags. Normally, you specify this match in conjunction with
the protocol match statement. In place of the numeric value, you
can specify one of the following text synonyms (the field values
are also listed): ACK(0x10), FIN(0x01), PUSH(0x08), RST(0x04),
SYN(0x02), URG(0x20), SYN_ACK(0x12).
IGMP message type. Possible values and text synonyms:
v1-report(0x12), v2-report(0x16), v3-report(0x22), V2-leave
(0x17)query(0x11)
ICMP type field. Normally, you specify this match in conjunction
with the protocol match statement. In place of the numeric value,
you can specify one of the following text synonyms (the field
values are also listed): echo-reply(0), echo-request(8),
info-reply(16), info-request(15), mask-request(17),
mask-reply(18), parameter-problem(12), redirect(5),
router-advertisement(9), router-solicit(10), source-quench(4),
time-exceeded(11), timestamp(13), timestamp-reply(14), or
unreachable(3).
Applicable
IP Protocols
All IP
All IP
All IP
TCP
IGMP
ICMP
ExtremeWare XOS 10.1 Concepts Guide