Extreme Networks ExtremeWare XOS Guide Manual page 124

Security
Policy Action Statements
Table 26 lists the possible action statements. These are the actions taken when the policy match
conditions are met in a policy entry.
Table 26: Policy Actions
Action
accounting-index <number> value <number>;
as-path "<as_num> {<as_num1> <as_num2>
<as_num3> .... <as_numN>}";
community [no-advertise | no-export |
no-export-subconfed | <community_num>
{<community_num1> <community_num2> ....
<community_numN>} | <as_num> :
<community_num> [<as_num1>
<community_num1> <as_num2>
<community_num2> ....}];
community [add | delete] [no-advertise | no-export |
no-export-subconfed | <community_num>
{<community_num1> <community_num2> ....
<community_numN>} | <as_num> :
<community_num> {<as_num1>
<community_num1> <as_num2>
<community_num2> ....}];
community remove;
cost <cost(0-4261412864)>;
cost-type {ase-type-1 | ase-type-2 | external |
internal};
dampening half-life <minutes (1-45)> reuse-limit
<number (1-20000)> suppress-limit <number
(1-20000)> max-suppress <minutes (1-255)>;
deny;
local-preference <number>;
med {add | delete} <number>;
med {internal | remove};
med set <number>;
next-hop <ipaddress>;
nlri [<ipaddress> | any]/<mask-length> {exact};
nlri [<ipaddress> | any] mask <mask> {exact};
origin {igp | egp | incomplete};
permit;
tag <number>;
weight <number>
124
Description
Sets the accounting index for a route. This is used in the
import policy.
Prepends the entire list of as-numbers to the as-path of the
route.
Replaces the existing community attribute of a route by the
communities specified by the action statement.
Communities must be enclosed in double quotes ("").
Adds/deletes communities to/from a route's community
attribute. Communities must be enclosed in double quotes
("").
Strips off the entire community attribute from a route.
Communities must be enclosed in double quotes ("").
Sets the cost/metric for a route.
Sets the cost type for a route.
Sets the BGP route flap dampening parameters.
Deny the route.
Sets the BGP local preference for a route.
Performs MED arithmetic. "Add" means the value of the
MED in the route will be incremented by <number> and
"delete" means the value of the MED in the route will be
decremented by <number>.
"Internal" means that IGP distance to the next hop will be
taken as the MED for a route. "Remove" means take out
the MED attribute from the route.
Sets the MED attribute for a route.
Sets the next hop attribute for a route.
These set statements are used for building a list of IP
addresses. This is used by PIM to set up the RP list.
Sets the BGP route origin values.
Permit the route.
Sets the tag number for a route.
Sets the weight for a route.
ExtremeWare XOS 10.1 Concepts Guide